User's Manual

ManualsBrandsSHENZHEN JINHUI TECHNOLOGY ManualsElectronicsWIRELESS CHARGING MOUSE PAD

Table Of Contents

页 1

三、safety instructions

During charging, if the phone runs APP or on using, the phone may heat up, it is

normal situation.

1.Please make sure there is no metallic material between the phone and charger

and the phone case is non metallic kind.

2 The wireless charger working temperature range is 0°C to 35 °C . it might get

damaged if the temperature out the range.

3.Please use the power adapter with 18W QC3,0 or quick charger

5V/2A or 9V/1.67A.

4.Please do not let children or animal paly with the product or eat it.

5 Please do not open or repair or refit the product.

6.Please do not put any magnetic card (eg credit card,sim card,bank card etc)

near the charging phone, they might get damaged by the magnetic effects

generated by charging.

7.Please do not use the charger if it gets punctured or broken, Please do not put

objects into the holes and do not put heavy objects on the product, do not

squeeze the product badly, do not drag the cables

8.Please use the charger with stable power supply.

四、Troubleshooting

Any problems please refer to below solutions. If problems still exit,please

contact the dealer or the maintenance

1. The charger not work.

1) Check the Wireless Charger USB port is good. Check whether the magnetic

port is in good contact, whether there is a foreign body.

2) check if use the proper adapter with 5V/2A or 9V/1.67A

3) check if the phone case contains metallic material

2. the charging ceased or don't reach 100% complete

1) Please make sure the adapter is 18W Q3 quick charger, or standard

5V/2A 9V/1.67A.

2) Please make sure the phone wireless receiver is right on the charging spot of

the mat.

五、 After-sales Service

1. Warranty year : 1 year (from the date of purchase)

2. Charge free during warranty period if the problem caused by product quality.

3. Replacement cost will be charged if the problem caused by human behavior

or using wrong power.

4. Any problem came up after the warranty 1 year you can always contact us only

charge for replacements.

WIRELESS CHARGING MOUSE PAD

W01

User manual

Please read the manual before using the product

and keep it for your reference.

version number:1.0

①

②

二、 Instructions for use

Please use an adapter with output power of 10W or more, plug in the Charger

and fix the end of the power line with the magnetic suction head and the

magnetic suction input por t of the bracket, the receiving position of the

mobile phone supporting wireless charging is then correspondingly placed

on the transmitting area of the wireless charger.

(Wireless reception is usually located in the middle of the phone)

一、product description

Specifications

name

Model

Power out

Power IN

Size

Charge conversion rate

75%

370 X 320 X 5MM

DC5V/2.1A 9V/1.67A

5W/7.5W/10W

W01

WIRELESS CHARGING MOUSE PAD

1. Wireless charging sensing area 2. netic input port

4. Charging the phone horizontally 5. Charging the phone vertically

③

④

Summary of content (2 pages)

PAGE 1
二、 Instructions for use 四、Troubleshooting Please use an adapter with output power of 10W or more, plug in the Charger and fix the end of the power line with the magnetic suction head and the magnetic suction input port of the bracket, the receiving position of the mobile phone supporting wireless charging is then correspondingly placed on the transmitting area of the wireless charger. (Wireless reception is usually located in the middle of the phone) Any problems please refer to below solutions.
PAGE 2
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.