Shenzhen Jinziyi Electronic Technology Co., Ltd SPECIFICATION IEEE 802.11 b/g/n 2.4GHz 1Transmit 1Receive WIFI REPEATER Version 1.0 2017.06.28 CoWIFI Extender: Shenzhen Jinziyi Electronic Technology Co., Ltd Date:2020-09 V1 WIFI Extender Quick Installation Guide (Q.I.G.) Introduction The 300M WiFi Signal Amplifier is a collection of wired / wireless network connectivity devices for network applications in small businesses, offices, and homes.
Shenzhen Jinziyi Electronic Technology Co., Ltd other wireless products with 11b/g and 11n protocols. Note: If you need a reset signal amplifier, you need to continuously hold the reset key for 10 seconds. Packaging content Before you use this product, check that the box is complete.
Shenzhen Jinziyi Electronic Technology Co., Ltd The A3. WIFI signal amplifier will automatically scan the surrounding WIFI signals, please select the WIFI signal that you want to connect (the following is only explained for example by connecting the 219 WIFI router).A password input interface will pop up, please enter the WIFI password for the router you want to relay amplification The A4. arrow is a modifiable area, and you can select the name of your device that you want to modify.
Shenzhen Jinziyi Electronic Technology Co., Ltd When the A5: configuration is complete, click save to save the current settings.The device is automatic Restart and then see a new WIFI signal from the phone or computer, in this example: 219_EXT.If the connection is not successful, repeat this operation.Or use the button for 5 seconds to reset. B is configured with other features by wired.
Shenzhen Jinziyi Electronic Technology Co., Ltd After the B2: connection, the computer can see the following display from the wireless network viewing properties: This step is negligible. After the B3: is logged in.The following page appears. This page is similar to the previous mobile phone page. If you want to do the relay amplification mode, you can follow the previous steps. If you want to use other functions, click off in the top right corner.
Shenzhen Jinziyi Electronic Technology Co., Ltd When page. B4: clicks on setup wizard, additional features appear on the It includes various router modes such as fixed mode, dynamic mode, AP routing mode and subLAN mode. Such patterns are not described and can operate selectively with reference to the disclosed router tutorial. Among them, the domestic ADSL, -ray cat dial, etc.
Shenzhen Jinziyi Electronic Technology Co., Ltd pecifications Hardware Features Model WIFI REPEATER Antenna Type IPEX ATN Chipset solution Voltage AC 120V±5% Dimension(L×W×H) Wireless Features Wireless Standards Frequency Range IEEE 802.11b/g/n 2412GHz---2462MHz IEEE 802.11b : 1,2,5.5,11Mbps IEEE 802.11g : 6,9,12,18,24,36,48,54Mbps Data Rates IEEE 802.11n : MCS0--MCS7 @ HT20 /2.4GHz band MCS0--MCS7 @ HT40 /2.4GHz band I Receiver HT40 MCS7 : -70dBm@10% PER(MCS7) /2.
Shenzhen Jinziyi Electronic Technology Co.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.