BANGOR ULTRA THIN HEADREST. DVD MONITOR { User Manual ) Model F 3018D Read this use manual carefully before using this product and keep it for future reference, Please contact us via FAN FOR Customer Service at: We will reply you within 24 hours and give you the best solution. if there may less happen short delay due to rest holidays, please help wait patiently and we will reply you asap once we see your emails.
1.CD, DVD, DVD VCD, SCUD Except Blu-ray Disc } 2.0 USB/SD/MMC/card slot (1920*1080 pixels and formats available), details see below picture. 3.AV Input & AV Output FM Speaker { Note: when it turn on, the player will have no audio) HDMI Input Port ( It Is not main function, if you'd like to use the function, please buy standard HDMI Cable and follow the instruction guide) Note: 1. When use the player's audio or earphone, please make sure FM is off. 2.
Package Content [HL na Lars [faa n i Headrest DVD Monitor Remote Control Button Cell ~~ Headphone RCA Cable Car Charger AC Adapter w 1*Bracket + 1 Screw * 5 Pairs of Plastic Adapters User Manual mer Bl fri * 1.There are 5 pairs of Plastic Adapters and the same sizes are placed on the diagonal. Choose the correct pair according to the size of the vehicle pole. 2 Not available for car seat without headrest poles or car pillar is curved.
Safely Precautions 1.8afe power: DC please do not use it on vehicles with DC 24V or other unsafe power. The Primary power except the specific voltage may cause fire, electrical shock or malfunction. 2. The DVD monitor is intended for car or home use only, and not for commercial or industrial use. 3. In the installation and the wiring of the unit, must have the expertise and experience, please read the operation carefully. If any question, please contact customer service.
16. Don't put the device near magnetic field, e.g. speaker. The normal function of the product may be disturbed by strong Electronic Magnetic Interference. If so, simply reset the product to resume normal operation by switching it off from the mains outlet and then switching it back on after several minutes. Attention 1.To ensure the proper operation, all the safety and operating instructions should be read carefully before connection and operation.
Warm Tips and Care Power Supply 1.Do not operate the product with wet hands, doing so may cause electric shock. 2 Always turn off the power and remove the car charger from the outlet when the appliance is not to be used for a long time and before cleaning. 3.Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. 4.Do not operate the appliance with damaged cord or after the appliance has been dropped or damaged in any manner.
5 Kindly direct the remote control to the sensor area on the left comer of the monitor. It works best at a distance less than 9.8 feet and at an angle up to 30 degree in front of unit. Please make sure no obstacles stand between the remote control and infrared sensor. Precaution of LCD monitor 1.Do not press the LCD screen, otherwise distortion or other fault may occur. The image may become unclear or LCD may be damaged.
other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation. If the product has been dropped or damaged in any way, and when the product exhibits a distinct change in performance, service is needed.
OC IN EARPHONE VAIN AY QUT 50 use HDMI Quick Operation Guide 1)First charge the device via AC Adapter or Car Charger ( included } 2)Open the disc cover via pressing the “PUSH” button on the back of the player, inset a disc into the slot, close the cover 3)Turn on the player via short pressing the E0§ button for about 1-2 seconds 4)Operate the player §) Long press the button for about 2-3 seconds 6) Unplug the AC Adapter or Car Charger Note: 1.
Ways to Mount it into Car Step 1. Choose a pair of correct size's Plastic Adapters, and install them into the car headrests posts. Step 2. Adjust the best length of mounting bracket according to posts’ distance, and fix it into headrest’s post firmly. Step 3. Insert the car DVD Player into the bracket and fix tightly with screw. Step 4. Adjust the screen position and finished. Below are Some Compatibility Notes and Installation Notes for Better and Quicker Mounting inch Car Headrest.
Remote Control Press to tum on or tum off the power in short time. When you don't use the player in long time, please unplug the Car Charger or AC Adapter. Press to choose DVD,HDMI,AV,USB,SD mode Press to choose sound track Press to make the sound off Press to choose different chapters and songs by the serial NO .
Remote Control Operation instruction Tips 1. When you are first using the remote control, you need to put the button cell to the remote control first. Kindly refer below steps and Installation of Button Cell to install the new button cell (3V) to the battery slot of the remote control. the thumb to press the button to right, meanwhile use the index finger to pull out the battery card slot. the button cell in the battery card slot.
3. The battery usually can be last work 1 year, for the safety and fluent using, it is beater to change a new button cell inside after 1 year. If the device no any reaction after remote, please first try to change a new battery. If it still does not work, feel free to contact the supplier to solve. 4. If there is a long time that will not use the remote control, please remove off the battery and stock it in a safe place in case kids swallow accidentally. 5. Do not heat batteries or dispose of them in fires.
Note: DVD disc production quality may vary and some discs may deviate from the industry standard. Some incorrectly formatted discs may still play, however, the playback and operational quality of the disc may be substandard. 2.DVD Playback Function (1)You have to select DVD in the source. {2)When inserting disc into drive slot, keep the label toward back. (3)The disc will be automatically read and played. (4) Press pil on panel or remote control to pause /play.
3.2 Synge Playback to TV Screen This device support connecting your TV with provided RCA cable. { Please see below Picture 3.2) 1) Insert a disc or other playback media and select DVD in the input source on the monitor .
USB/ SD! MMC Card Storage Device Protection 1). The operating features described here might not be possible for some USB devices or SD/ MMC memory cards. Always refer to the instructions supplied with textual devices. 2). Always insert the SD/MMC card in the correct direction. Failure to do so may result in damage fo the memory cards and this monitor. Do not force the memory card into the slot. 3). Not all USB and SD/MMC cards can be recognized in this monitor.
Note: When user turn on the last memory function, DVD player will continue to play the video from where you left off last time, no worry about playing form the beginning. 7.HDMI IN Function-Synge up to 1080P Video from Your Smartphone 7.1 This DVD player built in HDMI IN function, support to connect your smartphone with standard HDMI Cable ( not included and you need to purchase if, see Picture 7.1 ) to connect with a phone to share the same screen. Please refer to the following operation guide to connect.
7.2 The Guides to Connect with Your Phone 1) HDMI In Sync up to 1080P video from 108 Device Below are details of correct way to connect your OS phone, and see the Picture 7.2.1. Step 1. Please use your 3 in 1 HDMI Cable or Lighting to HDMI Cable with USB plug. Please use the connecting of Way 1. One end connect the player: one connect HDMI port of the player, the other connect Power Bank/ Adapter to charge the player. The other end connect the phone. steppe. Short press [TF button and select HDMI. Step.
A. 4 Picture 7.2.2 Way 2 How to do when use way 2 but it happened to not working correctly? 1) It works under certain situation, because the differences of standard HDM! Cable's compatibility and Power Supply, when you use way 2 and it happened to unstable situation, please change way 1. 2) How to make Way 2 work in stable situation? One end connect the player: one connect HDMI port of the player, the other connect USB port of the player. The other end connect the phone.
System Setup GENERAL SETUP PAGE TV DISPLAY: 16:9 ANGLE MARK: ON/OFF. If the discs which you put support different angles, tum on the “Angle Mark” function, and press “angle” on the remote control, you can choose different angles as you like. 08D LANGUAGE: Choose your preferred system language, there are 6 options. (ENGLISH, JAPANESE, FRENCH, GERMAN, ITALIAN, SPANISH). The default language is ENGLISH. SCREEN SAVER: ON/OFF LAST MEMORY: ON/OFF.
VIDEO SETUP PAGE SHARPNESS: HIGH, MEDIUM, LOW BRIGHTNESS: Screen brightness adjustment, the default value is 00. CONTRAST: Screen contrast adjustment, the default value is 00. HUE: Screen hue adjustment, the default value is 00.
Press the “MENU" button on pane! or “TFT/MENU” button on the remote control, you will find options of “OSD language, FM,Buzzer, Picture Mode, Brightness, Contrast, Sharpness, Color, Tint, Software Update, COM, Reset”. "Menu"function is just similar to "SETUP function”, but they are independent and will not influenced by each other. You can set them according to your needs. 1.08D Language There are six languages, English/Deutsch/France/ltaliano/Espaol/ Fl £58 for you to choose. 2.
Possible Reasons or Solution Can't connect to smartphone 1. Make sure you have used standard HDMI Cable. 2. Please use the connecting of Way 1. One end connect the payer: ane connect HDMI port of the player, the other connect Power Bank/ Adapter to charge the player. The other end connect the phone. 3. Due fo copyright issues, some applications do not allow video stream through your phone. If you have any questions about the connections, please fes! free to contact us.
Guarantee Regulations: A Within guarantee our company free the products, which are not damaged by person. B.Within guarantee you can repair at the local dealer with the maintenance, which should be sealed. C Within or after guarantee, you should pay for maintenance if damaged by removing or by person. Warranty Exclusion The warranty will not be valid if 1.The product has not been installed, operated or maintained in accordance with the manufactures operating instructions with the product. 2.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
