User's Manual
Table Of Contents
- 1. Product Overview
- 2. Pin definition
- 3. Electrical parameters
- 4. Reflow welding temperature curve
- 5. Application circuit
- 6. Contact Us
- Federal Communication Commission Statement (FCC, U
- FCC Caution:
- IMPORTANT NOTES
- OEM integration instructions:
- Validity of using the module certification:
- End product labeling:
- Information that must be placed in the end user ma
- Integration instructions for host product manufact
- 7.2 List of applicable FCC rules
- 7.3 Specific operational use conditions
- WiFi Specification：
- BLE Specification：
- 7.4 Limited module procedures
- 7.5 Trace antenna designs
- 7.6 RF exposure considerations
- 7.7 Antennas
- 7.9 Information on test modes and additional testi
- 7.10 Additional testing, Part 15 Subpart B disclai
BL-61C WIFI+BLE module
Copyright © 2020 ShenzhenJiXinInteligence Co., Ltd All Rights Reserved
Page
9
of 19
6
NC
reserved pin
7
NC
reserved pin
8
NC
reserved pin
9
NC
reserved pin
10
NC
reserved pin
11
NC
reserved pin
12
NC
reserved pin
13
IO11
GPIO11；SPI_SCLK；I2C_SDA；UART；PWM_CH1；
IROUT/ADC_CH10；JTAG_TDO
14
IO12
GPIO12；SPI_MISO；I2C_SCL；UART1；PWM_CH2；
ADC_VREF/ADC_CH0；JTAG_TMS
15
GND
ground
16
IO14
GPIO14；SPI_SS；I2C_SCL；UART；PWM_CH4；ADC_CH2；
DAC_OUTB；JTAG_TCK
17
IO21
GPIO17;FLASH_CS;SPI_MOSI;I2C_SDA;UART;PWM_CH1;JTA
G_TDI
18
IO22
GPIO17;FLASH_D3;SPI_SS;I2C_SCL;UART;PWM_CH2;JTAG_T
CK
19
IO20
GPIO20;FLASH_D0;SPI_MOSI;I2C_SCL;UART;PWM_CH0;JTA
G_TMS