User's Guide

How to assemble and remove the belt clip

Slide the clip into the slot on the back of the radio until

it is snapped into place.

-To remove

Gently pull the lock tab, and then push up the belt clip

to remove it from the radio.

How to install or replace batteries

Make sure the radio is turned off;

Remove the belt clip;

Slide and lift the battery compartment cover;

Insert 4 AAA batteries with correct polarity into per

radio;

Close the battery cover and attach the belt clip.

(Note: Please remove the batteries if the units are not

used for a long time)

Installation

Turning on the radio

Press and hold button for three

seconds. A short audible beep and

a display of the LCD screen shows

that the radio is on.

Turning off the radio

Press and hold until an audible beep is heard and

the screen disappears.

Operation

How to attach the strap to the belt clip

Thread the strap through the hole on the belt clip;

Thread the other end of the strap through the string,

then pull it to secure (See Pic 3).

The sensitivity

Modulation receiver bandwidth

Adjacent selective

Intermodulation interference resistance

Spurious response inhibition

Audio output power

Audio distortion

Pic 1 Pic 2 Pic 3

≤0.2uV

±5KHz

≥40dB

≥35dB

≥70dB

≥300mW

≤8%

RECEIVER