Quick Start Guide

The doorbell will be in “sleep mode” to save power, and can be activated remotely from the CloudEdge App to view
and control.
13. Key features
The doorbell support 2-way audio intercom. You can see, hear and speak to your visitor even when you are not on
the go.
A max. 30-second voice message can be prerecorded into the doorbell, which enables you to quickly reply your
visitor with the voice message when you are not convenient to answer the call.
With PIR motion sensor build-in, your doorbell detects human movements in front of it and sends you motion alerts
and snapshots prior to the visitor’s knock. And it would prevent intrusion/burglary before they actually happen.
Embedded with power management module, your doorbell can tell you the battery consumption status, showing
the estimated usage time and sending you low-battery alerts when it needs a recharge.
Insert a Micro-SD card (Max. support 128GB) or activate the cloud storage service to record your video clips.
Remote view & control
Full duplex audio
Prerecorded quick response
PIR human detection
Low battery alert
Local & Cloud storage
1. Press and hold reset button on the chime for about 5 seconds till the indicator flashes blue twice, and the
chime will be restored to factory default.
2. You can also tap on “unbind” (See to
Picture.6 ) in the APP to release the connection between doorbells
and wireless chimes.
Enter into Settings->Wireless Chime, there are 4 ringtons available(See to
Picture.3 ).
Unbind
Select ringtone
Enter into Settings->Wireless Chime, and you can control the volume level for the chime(See to Picture.3 ).
Volume control