Installation Instructions

Table Of Contents

Connect the chime

The chime can be powered by 3 units of AA batteries or a DC5V⎓ 1A power adapter.

Supply power to the chime

Click reset button

Press the doorbell button

Click on RESET only once, and you will see the

chime indicator flashing red, indicating that the

chime is in pairing mode.

Press the doorbell button, and the chime will sound,

together with its blue LED flashing. Chime paring

succeeds, congrats.

(not included)

Reset Button

Red LED Flashing

Blue LED Flashes

NOTE:

1. Your doorbell communicates with the chime via Radio Frequency, but not WiFi.

2. You can assign different chimes as needed.

3. Press and hold

RESET

button on the chime for 5 seconds till the red indicator flashes 3 times, so

as to release the connection between the chime and its connected doorbell.

PAGE 1
Connect the chime 1 Supply power to the chime The chime can be powered by 3 units of AA batteries or a DC5V⎓ 1A power adapter. (not included) Powered by AA batteries Powered by DC5V Adapter and Micro USB Cable 3 Press the doorbell button 2 Click reset button Reset Button Red LED Flashing Blue LED Flashes Click on RESET only once, and you will see the chime indicator flashing red, indicating that the chime is in pairing mode.
PAGE 2
FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.