User Manual

1. device connection failed?
Please put routers, devices and mobile phones in the same area, as close as
possible;
Please confirm that the connected Wi-Fi signal is normal ;(support 2.4 GHz Wi-Fi
network only)
3 Please press the Wi-Fi button to re-enter the network mode, try again to connect
the distribution network.
2. Bluetooth device can not connect?
Please make sure the Bluetooth is on;
Please confirm that the device is bound to other Bluetooth devices
3.APP suddenly can't control the equipment?
Could be a network cause or the device is offline
Please confirm that the equipment is energized;
Please confirm that the connected Wi-Fi signal is normal ;(only support 2.4 GHz
Wi-Fi network) it is recommended that you keep APP open for about 3 minutes to
see if the device is still in normal online state;
If you are still online, put your phone next to the device and connect to the same
Wi-Fi, as the device. Try opening the page to see if it is smooth to determine the
network.
Exit the phone's background application, open it again and try again.
4. how to reset Wi-Fi?
Press the "Wi-Fi distribution network button until the display area Wi-Fi icon
flashes, the reset Wi-Fi is successful; if not, the device is completely powered
off and retry.
* Reset Wi-Fi removes the bound device and clears the previous parameter settings.
5. in the hot distribution network (compatible mode) did not find SmarLife-xxxx how
to do?
Turn on mobile location, Bluetooth and Wi-F (i only support 2.4 G);
Try to automatically discover or manually add a re-distribution network.
6. device status can not be synchronized with the display status on the APP?
Please confirm that the equipment is connected;
When using the APP operating device, check that the device status is synchronized
with the display status on the APP.
FAQs