User's Manual

NOTE 2 These guidelines may not apply in all siluations.

Eleclromagnetic propagation is affected by absorption and

reflection from slructures, objecls and people.

Field strengths from fixed transmitters，such as base stations

for radio (cellular/cordless) telephones and land mobile radios,

amateur radio, AM and FM radio broadcast and TV broadcast

cannot be predicted theoretically with accuracy. To assess the

electromagnetic environment due to fixed RF transmitters, an

electromagnetic site survey should be considered. If the

measured field strength in the location in which the JPD-FR302

is used exceeds the applicable RF compliance level above，the

JPD-FR302 should be observed to verify normal operation. If

abnormal performance is observed，additional measures may

be necessary，such as re-orienting or relocating JPD-FR302.

Over the frequency range 150 kHz to 80 MHz，field slrengths

should be less than 3V/m.

Recommended separation distances between portable and mobile

RF communications equipment and the ME EQUIPMENT or ME

SYSTEM - for ME EQUIPMENT and ME SYSTEMS that are not

LIFE-SUPPORTING

The Infrared Thermometer JPD-FR302 is intended for use in an

electromagnetic environment in which radiated RF

disturbances are controlled. The customer or the user of the

Infrared Thermometer JPD-FR302 can help prevent

electromagnetic interference by maintaining a minimum