Quick Start Manual

1 Start using
This device supports steps statistics, sleep monitoring, heart
rate monitoring, blood pressure monitoring, message push,
music playback and control, exercise monitoring, voice calls,
emergency calls and other functions.
1.Start using
2.Basic functions
3.Water proof
4.Precautions
EN
Quick start manual
After unpacking and taking out the device, please insert
the USB end of the charging cable into the charging head
interface, and connect the metal contact on the other
end to the contact of the device base. After the power is
turned on, the device can be charged normally after the
charging prompt appears on the screen. Under normal
circumstances It can be fully charged in 2 hours.
1.1 Start charging
Charging indication
Precautions:
Please use the special charging
cable that comes with the package
to charge. Please dry the charging
port before charging.
Make sure the contact is good. If there is no charging prompt
on the screen, you can charge for a while and observe.
1.2 Power On/off
Scan the following QR code and click to download and
install the App according to the mobile platform.
1.3 Download and install the app
Power on
：Long press the side button
of the device to turn it on.
Power off：Click Shut down on the
device settings page to shut down
Power button
Open the App, switch to the "User" page, and click on the
user information bar to jump to the login registration
page. On the registration page, use a mobile phone or
email to register an account. After the registration is
successful, log in with the account and password.
1.4 Register login and enter information
Open the App, switch to the "Device" page, click "bind",
turn on the Bluetooth, give the "Get Location" permis-
sion, enter the scan page, the app will automatically scan
the device, after scanning the device, click the device to
connect normally.
1.5 App connection device
When the device is already connected, pull down the
"Home"page to start synchronizing device data. After
synchronizing the device data, today's data can be
displayed on the homepage.
1.6 Sync device data
Step count
Click each item on the "Home" page to jump to the
details page. On the details page, click the "Date" column
to select the date you want to view, or click "<" or ">" to
switch between the previous day and the next day.
Swipe left
on the main interface to switch to the step
count page. The distance unit is kilometers in the metric
system, and miles in the imperial system.
1.7 View historical data
2 Basic functions
Sleep monitoring only records sleep data from 8pm to
10am when you fall asleep, and supports the recording
of light and deep sleep.
The device supports displaying the playback status of
mobile phone music, and you can control the previous
song, the next song, and adjust the volume on the device.
When the phone receives a new notification, the device
will vibrate to remind you to receive a new notification.
The device and the App are required to maintain a
valid connection.
The corresponding message notification switch needs
to be turned on on the App.
When the device audio Bluetooth is connected, you can
answer the phone on the device when you receive an
incoming call, and you can control the phone to answer
the phone when the audio Bluetooth is not connected.
Voice calls
Press and hold the side button for 5 seconds to enter the
emergency call, and the app will call the preset emergency
contact.
The device supports running, walking, cycling, yoga, and
plank. Click on the exercise page on the device to start
recording exercise data.
Exercise monitoringSleep monitoring
Message push
Music playback and control
Emergency calls
Heart rate monitoring is turned on by default, you can
turn off and turn on automatic monitoring in the app’s
Device>Monitoring Settings>Auto Heart Rate Monitor-
ing.
Measure the heart rate on the device, the test result will
not be saved.
Heart rate monitoring
The blood oxygen test requires the user to perform the
test in a static state. If the test cannot be obtained in the
wearing state, the
device can be removed and the
fingerprint of the finger can be tightly pressed against the
bottom sensor for testing.
Blood oxygen test
The blood pressure monitoring is turned off by default.
You need to turn on the blood pressure monitoring in the
device> monitoring settings> automatic blood pressure
monitoring in the app to display the blood pressure
monitoring page on the device. If it is closed, the device
will not display it.
Measure the heart rate on the device, the test result will
not be saved.
Blood pressure monitoring
3.1 The device supports IP67 life waterproof.
3.1 The waterproof performance of the device is not
permanently effective, and may change over time.
Weakened by passage.
3.3 The device supports use when washing hands and
raining, and does not support hot showers,Used in
diving,surfing and other scenes.
3.4 The following conditions may affect the waterproof
performance of the device
The device has been dropped, bumped, or hit.
The equipment is in contact with shower gel, detergent
perfume, etc.
3 Water proof
Do not wear it in hot showers, saunas and other high
temperature scenes.
4.1 Android devices need to be given app location
permission, and only when the GPS switch is turned
on can the device be searched.
4.2 For devices with IOS 13 and above, it will be received
when the information reminder is turned on If there is
no information reminder, please go to Settings
"Bluetooth" Devices "【 】Open the [Sharing System
Notification] option.
Precautions
4.3 If the data cannot be tested during heart rate
monitoring, please wear the device at 1 finger
away from the wrist joint, adjust the strap to the
appropriate range of tightness, and adjust the
strap to the appropriate range of tightness.
4.4 The equipment is not medical equipment, the
data is for reference only, please consult a doctor
before seeking medical attention
iOS
Android
Google