user’s manual Hot Joe II model #: PWS02 2014.10.
What’s Included Unpack the Hot Joe II and make sure all accessories are put aside so they will not be lost. hello. Micro USB Cable Thank you for purchasing Hot Joe II [PWS02]. ® Portable Bluetooth Speaker Features • Bluetooth 2.1 + A2DP, AVRCP • Hands-free speakerphone • Wireless range of up to 30 feet • Stereo speakers with RealBass technology • Easy USB charging • Rechargeable Lithium Battery • 3.5 mm auxilary input jack 2014.1 0.
Contents Safety Information Introduction 2 What’s Included 3 Safety Information 5 Important Safety Instructions Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in this user’s manual and on the Hot Joe II. 1. ATTACHMENTS - Do not use attachments not recommended by the manufacturer. Getting Started Location of Main Unit Controls 7 2.
Safety Information Getting Started 6. HEAT - The Hot Joe II should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) that produce heat. Location of Main Unit Controls 7. SERVICING - The user should not attempt to service the Hot Joe II beyond those methods described in the user’s manual. Opening or removing covers will expose you to dangerous voltage and other hazards.
Operational Instructions Operational Instructions Charging the Unit Pairing Your Bluetooth Device 1. Charge your Unit through any Micro USB Jack or wall charger. 2. The LED indicator will turn red while charging. 3. Once the battery is fully charged the red indicator will turn off. Note: - Please charge the battery up to 4 hours before initial use. 1. Turn the unit ON on the unit. The Hot Joe II will beep and the indicator will turn blue and will flash indicating the unit is in pairing mode. 2.
Operational Instructions Troubleshooting Hands-free Speakerphone Placing a Call • To place a call simply initiate the call from your Bluetooth connected phone and the call will automatically be routed through your paired Hot Joe II and the music will be stopped. • When the call is terminated, the current music will be resumed. The call can also be terminated by pressing the Hands-free button. Symptom Solution No power Recharge the battery. Move the power switch to ON position.
Compliance with FCC Regulations Caution! The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.
Warranty Information Specifications Obtaining Service: To obtain service, product literature, supplies or accessories please call 1 888-920-8680, or visit our website, www.att.com/electronics, to create a ticket for exchange/repair. Please make sure to provide the date of purchase, model number and a brief description of the problem. Our customer service representative will contact you or send detailed return instructions. - Bluetooth 2.1 - Bluetooth compatibility: Bluetooth 2.
www.att.com/electronics 2014.10.23 17:05:36 +08'00' ©2014 Concept 101 LLC. All Rights Reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to Concept 101 LLC, New York, New York 10018. Printed in China. Issue 2.0 AT&T 10/2014.
