User's Manual

6
CLOCK SETTING
Connectthepoweradaptor.Theunitwillbeinstandbymode.Youcannowsetthe
clocktimeandadjusttheLEDbrightnessasfollows:
SETTING THE TIME MANUALLY
1.) Tosetthehour,pressandholdtheMEMORY/SETbuttonuntilthehourdigits
ash.
2.) Whilethehourdigitsareashing,repeatedlypressthe
or buttontoselect
thecorrecthourdigits.
3.) PresstheMEMORY/SETbuttontoconrmthehoursettingandtheminute
digitswillashtopromptforinput.
4.) Whiletheminutedigitsareashing,repeatedlypressthe
or buttonsuntil
thecorrectminutedigitsaredisplayed.
5.) PresstheMEMORY/SETbuttonagaintocompletetheclocksetting.
6.) Withthecurrenttimeshowing,pressandholdtheSNOOZE/SLEEP/DIMMER
buttonuntil“12H”apppearsandashesonthedisplay.Pressthe
or
buttontoswitchto24hourformat.
NOTE:
i. When setting the PM time in 12H mode, make sure the PM indicator turns on.
DIMMER
1.Whentheunitisinstandbymode,presstheSNOOZE/SLEEP/DIMMERbutton
toadjusttheLEDdisplaybrightnesstohighorlowlevel.
RADIO OPERATIONS
TUNING THE RADIO AND STORING THE PRESETS
1.) PressthePOWER/FUNCTIONbuttonontheunittoturnontheunit.
2.) PressthePOWER/FUNCTIONbuttonrepeatedlytoselecttheRADIOmode.
TheFMfrequencywillbedisplayed.
3.) Pressandholdeitherthe
or

buttontoautomaticallysearchforastation
andstopwhenoneisfound.
NOTE:
Press
or button repeatedly to ne tune the station received during auto
tuning.
4.) PresstheMEMORY/SETbuttonand
or buttontostorethereceived
stationsinorder.
5.) PresstheMEMORY/SETbuttonagaintoconrmthesetting.
6.) Repeatsteps3-5tosearchfor,andstorethedesiredstations.20stationscan
bestoredintotal.
7.) PresstheCHMODEbuttonand
or buttontoselectthestoredstationyou
wishtolistento.TheLEDdisplaywillshowthefrequencyofthepresetstation