User's Manual

8
LISTEN TO EXTERNAL AUDIO DEVICE
ThisunitprovideswithanauxiliaryinputjacktoconnectyourcellphoneorMP3
player,etc.
1.) Useanaudiocable(notincluded)with3.5mmstereoplugoneachendofthe
cable.
2.) PlugoneendintotheAUXINJackontherearoftheunitandtheotherendof
thecableintotheLine-outjackorphonejackonyourexternalaudiodevice.
3.) PressthePOWERFUNCTIONbuttonrepeatedlyuntil“AU”appearsonthe
display,theunitwillturntoAUX INmode.
4.) Activateyourexternaldevice.
5.) Duringplayback:
 PresstheVOLUME+/AL1buttontoincreasethevolume.
 PresstheVOLUME-/AL2buttontodecreasethevolume.
NOTE:
i.
/ or buttons only work with a Bluetooth source.
ii. If there is no sound, or the sound is not loud enough, you can increase the
volume from your source device.
iii. There is a USB port on the rear of the unit to charge an iPod/iPhone
device.
BLUETOOTH OPERATIONS
PAIRING
1. PressthePOWER/FUNCTIONbuttonrepeatedlyuntil“bt”appearsonthe
display.
2. ActivatetheBluetoothpairingonyourexternaldevice.Thesourcewillnowscan
forotherBluetoothdevicesandshouldndtheunit,identiedas‘SCR1996-PL
Choose it to pair with your device.
3. Pressthe
buttontostartplayback.
NOTE:
i. Enter 0000 if asked for a password during pairing.
ii. Before pairing, disconnect the AUX IN cable.
PLAYBACK CONTROL
Press
toskiptotheprevioustrack.
Press
toskiptothenexttrack.
Press
toswitchbetweenplayandpause.
PressVOLUME+/ALARM1buttontoincreasethevolume.
PressVOLUME-/ALARM2buttontodecreasethevolume.