User's Manual

PAIR
Pair /Power
Indicator
Power/Pair Button
Dock
Connector
1. Once connected for the rst time, the
unit should turn on automatically.
If the unit does not power on, press
and hold the Pair button for 3+
seconds to power the unit on.
The Pair /Power Indicator
will ash slowly.
A beep will sound when the
unit has been recognized.
2. Repeat step one to power the unit o.
The Pair /Power Indicator will turn o.
1. Set your iPod audio device
to iPod mode.
Refer to the user’s manual for your
specic device for instructions.
2. Connect the IAB53 using
the Dock Connector.
Power
PairingConnecting
1. Once the unit has been recognized,
the Pair /Power Indicator will
ash slowly when searching, then
quickly to enter pairing mode.
If the unit does not enter pair
mode automatically, press the
power/Pair button once.
2. Using the native controls
on your Bluetooth device,
select the “IAB53” to pair.
If your device requests a password,
enter the default password “ 0 0 0 0 ”.
Refer to the user’s manual for your
specic device for instructions on pairing
and connecting Bluetooth devices.
3. Press and Hold the Power/Pair button
to turn o and disconnect the IAB53.
Status Indicator
Power O No light
Searching Slow ashing light
Pairing Quickly ashing light
Connected Solid light
IAB53-771-01-IB.indd 1-4 11/7/2012 10:42:45 AM