True Wireless Dual Bluetooth Speakers DUAL PORTABLE WIRELESS SPEAKERS MODEL No.
Important Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Important Safety Instructions Before using the unit, be sure to read all operating instructions carefully. Please note that these are general precautions and may not pertain to your unit. For example, this unit may not have the capability to be connected to an outdoor antenna. 1. Read these instructions – All the safety and operating instructions should be read before the appliance is operated. 2. Keep these instructions – The safety and operating instructions should be kept for future reference. 3.
CONNECT SPEAKERS PAIR VOLUME AUX / AUX IN AUX IN 1. / (Previous/Next) Button 2. Volume Down/Volume Up Button 3. Bluetooth(Blue)/AUX IN(Green) Indicator 4. (Play/Pause/Handsfree/Pair) Button DC IN DC IN POWER ON OFF POWER ON OFF 5. Charging(RED)/Pairing(Yellow) Indicator 6. Built-in Microphone 7. AUX IN Jack 8. DC IN Jack 9.
BATTERY CHARGING 1. Connect the micro-USB plug into the DC IN jack on the unit. 2. Connect the USB plug into a USB port on a computer or a DC 5V USB power supply device. NOTE: During charging, the indicator light on the unit will turn red. Once the unit is fully charged, the indicator light will turn off. AUX IN OPERATION 1. Connect the Headphone/Earphone; Aux out jack or Line out jack from the external audio player (such as MP3 player; Discman...
BLUETOOTH PAIRING AND CONNECTION NOTE: Before pairing, make sure the AUX IN cable is not plugged into the AUX IN jack. If the two units were connected and paired before, the two units will connect and pair with each other automatically. FIRST TIME PAIRING 1. Switch on the two units. 2. Press the button on one unit, then press the button on another unit, wait until they send a piece of chime, now the two units connect with each other. 3.
BLUETOOTH PAIRING AND CONNECTION DISCONNECTION / RE-CONNECTION Press and hold the or button on main unit to disconnect with both deputy unit and the external bluetooth enabled device. If using same external bluetooth enabled device to pair with the main unit again, select the "ISBW2116" of main unit again to connect with main unit again, then wait deputy unit automatically connect with the main unit.
TROUBLESHOOTING GUIDE Check the followings before requesting service SYMPTOM POSSIBLE CAUSE POSSIBLE SOULTION No power The power is consumed Recharge the unit. Volume in minimum position Raise volume level by pressing the (Volume) + button. No sound The paired/connected device is not in payback mode Play music/movie in the paired/connected device as usual and make sure the volume level of it is in high level. Reduce the volume level by pressing the (Volume ) - button.
SPECIFICATION Speaker output power..............................................................................................2X3W Built-in battery............................................................................................3.7V,1000mAh Charging power.........................................................................DC 5V 500mA Bluetooth working range........................................................approximately 33 feet (10m) Playing time......................................
Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
