EMERSON BLUETOOTH SPEAKER Model:EBT950
Safety Instructions -The lighting flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. -The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Product Overview 1. Previous/Next Button 2. Built-in Microphone 3. Play/Pause/Standby button 4. Bluetooth/Battery Indicator 5. Volume Up/Down Button 6. USB Charging Port 7.
Charge Battery The device is operated via the integrated lithium battery. Charge the battery as follows: 1.Plug the micro B USB plug of the charging cable into the jack of the device. Connect the USB plug to a powered-on computer. The indicator lights up red and the battery begin to charge. 2.If the battery is completely charged, the indicator red light turns off. 3.Remove the charging cable from the Speaker and PC.
Note: -Depending on the device manufacturer, you need to perform the registration (PAIRING) again to connect the devices. - In case of problems with the pairing of a playback device, Deactivate The WiFi-/and mobile data function in your playback device. -The Bluetooth compatibility cannot be ensured for devices (e.g.Mobile phones) getting released in the future. -To ensure an optimal connection, Make sure that the battery of your player is completely charged.
Troubleshooting Symptoms Cannot switch the Speaker Possible cause Solution Battery exhausted Charge the battery. No audio signal during Volume of the external audio Increase the volume of the playback through AUX. source is too low. external audio device. Volume of the device too low Increase the volume with + on. button No audio signal during Speaker is switched off. Switch the Speaker on. Bluetooth connection. Speaker is not paired to the Check whether the audio device.
Operating time:....................................................................................................approx. 5 hours (with volume level set at 1/2 ) Bluetooth: Bluetooth support:................................................................................................................V2.1 Range:.......................................................................................................................>10 meters Transmitting frequency:............................................
FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
