User's Manual

3
Charge Battery
The device is operated via the integrated lithium battery. Charge the battery as follows:
1.Plug the micro B USB plug of the charging cable into the jack of the device. Connect the USB
plug to a powered-on computer. The indicator lights up red and the battery begin to charge.
2.If the battery is completely charged, the indicator red light turns off.
3.Remove the charging cable from the Speaker and PC.
Note:
-In Bluetooth mode, the Speaker will send an alarm sound every 30 seconds when the battery
is nearly exhausted,.
Battery Caution
--The battery (batteries or battery pack) shall not be exposed to excessive heat such as
sunshine, fire or the like.
-Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent
type.
-Please refer to the information on exterior bottom enclosure for electrical
and safety information before installing or operating the apparatus.
Use
You have two ways to use the device: By cable or cordless via Bluetooth.
By cable
1. Connect supplied the 3.5 mm stereo cable to an external audio source.
2. Insert the other end of the cable into the AUX IN Jack on the Speaker
3. Turn on the Speaker by holding the Standby button .
4. Set the volume of the external audio source to an audible volume.
5. Adjust the volume with the Volume +/- buttons on the device.
Cordless via Bluetooth
If an audio cable is connected to the AUX IN jack, A connection via Bluetooth Is not possible.
Due to the different device manufacturers, models, and software versions, a full functionality
cannot be guaranteed.
- Logging on devices (Pairing)
Before you listen to music via the unit, you must pair the devices.
1. Ensure that the Bluetooth function is activated in your player (e.g. mobile phone). For this,
refer to the operation manual of your player.
2. Turn on the Speaker by holding the Standby button. The Bluetooth indicator will start to flash
rapidly after a short time.The Device Is now set to the pairing mode.