BLUETOOTH SPEAKER WITH BUILT-IN RECHARGEABLE BATTERY Model:BT2165GB PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE OPERATING UNIT
The lighting flash with arrowhead symbol, within an equilateral triangle, is intended to alert user to the presence of uninsulated “dangerous voltage” within the product’s enclosure, that may be of sufficient magnitude to constitute a risk of electric shock to person. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER ( OR BACK ). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFETY INSTRUCTIONS Before using the unit, be sure to read all operating instructions carefully. Please note that these are general precautions and may not pertain to your unit. For example, this unit may not have the capability to be connected to an outdoor antenna. 1. Read these instructions – All the safety and operating instructions should be read before the appliance is operated. 2. Keep these instructions – The safety and operating instructions should be kept for future reference. 3.
Product Overview 1 2 3 4 7 6 5 8 9 1.Built-in microphone 2.Volume Up (+) button 3.Next ( ) button 4.Play/Pause/Standby On-Off /Phone button 5.Volume Down ( ) button 6.Previous ( ) button 7.Bluetooth/Battery indicator 8.USB charging port 9.
BATTERY CHARGING The unit is operated by an integrated lithium battery. Charge the battery as follows: 1.Plug the micro B USB plug of the charging cable into the jack of the unit. Connect the USB plug to a powered-on computer. The indicator lights up red and the battery begins to charge. 2.If the battery is completely charged, the indicator red light turns off. 3.Remove the charging cable from the Speaker and PC.
4. If it asks for a password, input pass code “0000” and confirm it to connect to speaker. When it has finished the sync’ing process, the blue LED light stays on all the time. Note: If an audio cable is connected to the AUX IN jack, the connection via Bluetooth will not work. Note: -Depending on the device manufacturer, you need to perform the registration (PAIRING) again to connect the devices.
Troubleshooting Problem Possible cause Solution Cannot switch the speaker on. Battery exhausted Recharge the battery. No audio signal during Volume of the external audio Increase the volume of the playback through AUX. source is too low. external audio device. Volume of the device too low Increase the volume with + button No audio signal during Speaker is switched off. Switch the Speaker on. Bluetooth connection. Speaker is not paired to the Check whether the connection audio device.
Technical Specifications Audio output ........................................................................................................... .......1.5W x 2 Power supply:...................................................................................................................DC 5 V Battery:..............................................................................................3.7V,400mAh Lithium-lons Operating time:.........................................................................
