WATERPROOF PORTABLE SPEAKER SYSTEM with Decorative Color Changing Lights and Bluetooth® Wireless Technology OWNER'S MANUAL PLEASE READ BEFORE OPERATING THIS EQUIPMENT. MODEL: MHT833 Size: 148.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product`s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Before using the unit, be sure to read all operating instructions carefully. Please note that these are general precautions and may not pertain to your unit. For example, this unit may not have the capability to be connected to an outdoor antenna. 1) Read these instructions. All the safety and operating instructions should be read before the product is operated. 2) Keep these instructions. The safety and operating instructions should be retained for future reference. 3) Heed all warnings.
17) Overloading Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 18) Object and liquid entry Never push objects of any kind into the product through openings as they may touch dangerous voltage points or short out parts that could result in fire or electric shock. Never spill or spray any type of liquid on the product.
POWER SOURCE The unit has a built in Sealed Lead Acid rechargeable battery, recharge it before use or when it is drained as follows: 1.Make sure the unit is in Standby or Power on mode. Otherwise, press the POWER ON-OFF Switch to ON position to power on the unit to standby mode. 2.Connect the small plug from the supplied AC/DC Adaptor to the DC IN Jack on the right of unit as the illustrated below. 3.Plug the AC/DC Adaptor to the AC wall outlet having AC 100-240V~, 50/60Hz as illustrated below. 4.
TOP PANEL 2 3 4 5 6 POWER MODE 1 0 10 MIC VOLUME 0 10 10 0 GT VOLUME MIC ECHO LIGHT VOLUME 7 8 9 10 11 FRONT VIEW 12 13 14 SIDE PANEL 15 MIC GT 19 18 16 USB 1A OUT 21 20 DC IN 17 23 22 1. MIC VOLUME (Microphone Volume) Control Knob 2. MIC ECHO (Microphone Echo) Control Knob 3. GT VOLUME (Guitar Volume) Control Knob 4. (Play/Pause) Button 5. POWER Indicator 6. MODE/ (Mode selection/Power) Button 7. LED Display 8. Indicators of Battery Meter 9. BATTERY METER Button 10.
OPERATIONS: General Operation: 1. Recharged the built in battery as previously instructed. 2. Press the Power ON/OFF Switch to ON position on the right of unit to turn the unit to standby mode. The POWER Indicator on the top of unit will illuminate. 3. Press and hold the /MODE Button on the top of unit approximated 1 second until “ON” appear on the LED Display to turn on the unit from standby mode. The LED Display will illuminate. 4. Press the /MODE Button repeatedly to switch to desired playback mode.
BT MODE: BT (Bluetooth) pairing: First time use or re-pairing the unit to a new BT Device, pair as follows: 1. Power on the unit and enter to BT mode as previously instructed. “bt” will appear on the display and blink. 2. Power on the external BT Device and enter to BT searching mode. Start pairing following the on screen instructions from the external BT Device. After paired, the “bt” Indicator on the display will stop blinking. 3.
FM (Radio): Search and play the FM station: 1. Power on the unit as previous procedures. 2. Press the MODE/ Button on top of the unit repeatedly until the " FM frequency " appears on display. 3. Press the or Button to search and play the desired station manually. or press and hold the or Button to search the available station, when a station searched, the unit will stop seraching and play the station.
Microphone: 1.Connect the supplied Microphone to the MIC Jack as the figure below: MIC USB GT 1A OUT DC IN Dynamic Microphone Included POWER ON OFF SIDE FUNCTION PANEL 2. Power on the unit and play the music as usual. 3. Slide the ON/OFF Switch on the Microphone to ON position to turn on the Microphone. 4. Turn the MIC Volume (Microphone Volume) Knob on the top of unit to adjust the sound level from connected microphone.
USB: 1. Insert the USB Device into the USB port as the figure below: MIC USB USB GT 1A OUT DC IN USB Device NOT Included POWER ON OFF SIDE PANEL 2. Power on the unit and play the music as usual. 3. Press the MODE/ Button on top of the unit repeatedly until the " USb" appears on display. 4. The unit will play the music in the connected USB device automatically. (Make sure the volume level of the external device in high level. Otherwise, sound from this unit is weak). 5.
Retractable Handle: Press the button on the top of the handle to release the lock then pull it out or back as the illustrated figure below: TROUBLESHOOTING GUIDE Check the follows before requesting service: SYMPTOM POSSIBLE CAUSE POSSIBLE SOULTION No power Power Switch is in OFF position Press the POWER ON-OFF Switch on the right of unit to ON position Built-in rechargable battery drained Recharge the built-in battery Volume in minimum position Rise volume level by turning the VOLUME Control Knob
Cleaning: 1. To prevent fire or shock hazard, disconnect your unit from the AC/DC Adapter when cleaning. 2. The finish on your unit may be cleaned with a dust cloth and cared for as other furniture. Use caution when cleaning and wiping the plastic parts. 3. Mild soap and a damp cloth may be used. General Specifications: Water and Dust Ingress Protection Level:....…..........................................................................…...IP44 Power Source:....….........................…...............
LIMITED WARRANTY Craig warrants this product to be free from manufacturing defects in material and workmanship under normal use for a period of 180 days from date of purchase. If service is required, please return the product to the store where it was purchased for exchange; or, pack the unit in the original packing material with all accessories if applicable, a copy of your sales receipt and a Cashier’s check or Money Order for $20 (to cover shipping and handling costs) payable to Craig Electronics Inc.
FCC NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.