FCC WARNING: To assure continued operation, follow the attached installation instructions and use only shield cables when connecting to other devices. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
PROdUCT OvERvIEW TOP VIEW 1 2 WPS 3 4 5 MODE 6 7 8 9 REAR VIEW 10 DC 5V ON OFF 11 AUX IN 12 7. Mode Indicator 8. Built-in Microphone 9. Charge Indicator 10. ON/OFF Switch 11. DC IN Jack 12. AUX IN Jack 1. LED Light Ring 2. Play/Pause,WPS Button 3. Previous/Volume Down Button 4. Next/Volume Up Button 5. MODE Button 6.
POWER SOURCE: There is a built in Li-ion rechargeable battery, recharge it if the battery is low. 1. Connect the Micro USB Plug from the supplied USB Connection Cable to the Micro USB Port on the rear of unit. 2. Connect the full sized USB Plug from the supplied USB Connection Cable to the USB Port on the USB Charger (During charging, the charge indicator on the top of unit will turn RED, When finished, it will turn off).
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
SETUP APP dOWNLOAd ANd INSTALLATION Download the MUZO Player from Apple App store for iOS devies. Download MUZO Player from Google Play store for Android devices. The App icon will appear as the figure on right after successful installation. MUzO Player NOTE: The following operation base on iOS system. The operation of Android is similar. CONNECTION 1. Switch on the unit, the mode indicator will blink blue and green for a few seconds, wait until it blinks green only, now it is WiFi mode. 2.
4. Inputing the WiFi password to make the speaker to connect to WiFi network(router), to continue. Press the Next < WIFI INFO 1 Please enter Wi-Fi password: Wi-Fi: XXXX Password: Please enter Wi-Fi password Next 5. Press and hold the WPS button on top of the speaker. Press the Next button on your MUZO Player to continue. < PRESS TO ENTER SETUP M... 2 Press the WPS key on device to put the device into network setup mode.
6. There will be voice instructing like " searching for WiFi connection", " waiting for WiFi connection" during the connecting process. < PLEASE WAIT 3 Wait for device to be connected to Wi-Fi... Don't operate device during Wi-Fi setup. Please wait for compltion of setup patiently. It's usually finished in 60 seconds. Cancel If you hear voice prompt for erro message. please go back and retry 7.
HOME PAGE INTERFACE Click the " MUZO " on screen to enter homepage, operate as below instructions and the screen instructions. Some platforms may need registration. Touch to search online songs Search Touch to listen the collected favorite songs Favorites Touch to listen native songs D D My music Touch to listen radio, talks, sports, etc.
SPOTIFY OPERATION Before use, you have to create an spotify premium account for log in. 1. Tap "Spotify" on MUZO homepage. 2. Input your account and password to log in. 3. Open the Spotify on your phone, tablet or PC, and play any song. 4. Tap the connect icon . 5. Pick your device from the list. Licenses The Spotify Software is subject to third party licenses found here: www.spotify.com/connect/third-party-licenses. IHEARTRADIO OPERATION Before use, you have to create an iHeartradio account for log in.
AMAZON LINK PLAY ALEXA VOICE CONTROL Before using Amazon linkplay Alexa voice control function, you must get an Amazon prime account, creat an account on Amazon website. 1. Touch Amazon on homepage, the log in window will pop up, input your account and password to log in. 2. If you have logged in before, the figures below will appear and operate as the tips. Amazon login successful Next 3.
TROUBLESHOOTING Check the following before requesting service: SYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTION Can’t power on Built in battery drained No sound or sound weak Volume level of paired/connected device Rise the volume level of the is in low level paired/connected device Sound distortion Volume level of the connected/paired Reduce the volume level of the device too high connected/paired device BT not f unctioning Recharge the battery The external BT device had NOT paired to Pair the exter
LIMITED WARRANTY NAXA LIMITED WARRANTY (“Warranty”) — For Product Categories Listed in Chart Below (as applicable, “Product”). Before returning your Product for service under this Warranty, please read the instruction manual carefully and visit our website at www.naxa.com for product updates and extended support documentation (e.g., Frequently Asked Questions, Common Troubleshooting Guides, etc …). If you are still having trouble with your Product, please contact Naxa Customer Support.
