User's Manual

BLUETOOTH OPERATION

Pairing the speaker with Bluetooth devices (phone or music device)

5. Once paired successfully, Bluetooth indicator will stop blinking and a tone will be heard.

6. If pairing is unsuccessful, turn off the speaker first and then re-pair following above steps.

and blink, now it is in pairing mode.

3. Activate the Bluetooth function on your Bluetooth device (phone or music device). Please

refer to the manufacturer’s instructions of your device.

4. Once you have activated Bluetooth on your device, select the speaker name from the

pairing list of available Bluetooth devices.

7. Once you have paired the speaker with a device, the speaker will remember this device

and will pair automatically when the device’s Bluetooth is activated and in range.

During playing:

Press the WPS button to pause, press again to resume playing.

Turn the volume knob to adjust the volume.

1. Plug one end of the adapter to DC IN jack of the speaker, plug the adapter into the wall

outlet, slide the power switch to ON position to turn on the unit. The mode indicator will

NOTE:

Only one device can be paired and connected with one unit.

NOTE:

blink blue and green alternatively, wait until the mode indicator turns and blinks.

GREEN

2. Press the MODE button repeatedly to turn to Bluetooth mode, the indicator will turn

BLUE

The pairing name is " ".

NAXA NAS-5001