Safety Information

11
REMOTE CONTROL OPERATIONS
BLUETOOTH OPERATION
~ Press the GOTO button the third time to display the time selection under Chapter.
Using the Direction and Numeric buttons to enter the desired time.
The unit will start play the movie from the selected time automatically.
GOTO ( CD )
~ Press the GOTO button once, using the Numeric and OK buttons to set the desired
playback time of disc.
~ Press the GOTO button twice, using the Numeric and OK buttons to set the desired
playback time of track.
~ Press the GOTO button the third time, using the Numeric and OK buttons to set the
desired track.
A-B Repeat
During Playback, press the A-B button to select the starting point, press it again to select
the ending then the player will play the selected section repeatedly and continuously.
Press the A-B button again to resume normal playback (This function is not available on
all discs).
After initial pairing, the DVD player will stay paired unless you unpaired it manually, or
erased due to a reset device. If this occurs or you fi nd the unit is unable to connect,
please repeat below steps:
1. Lift up the panel and turn to desired angle. Slide the Power ON/OFF switch to "ON"
position to power on the unit, the Blue Indicator on front of the player will light.
2. Press the PAIR button once on your DVD player, the Blue indicator on front will blink
fast to indicate you it is searching for a bluetooth device.
3. Activate the bluetooth function on your bluetooth device, after a while, the pairing will
be connected automatically.
The indicator on front of your DVD will light with solid Blue.
4. During playing, press the
Play/Pause button on DVD or remote control to pause,
press it again to resume the playing.
Press the VOL- or VOL+ button on DVD or remote control to adjust the volume level.
NOTE:
●
The Build-in Bluetooth transmitter function device (such as smart phone) can not be
connected with your DVD player.
●
To reconnect to a different device, deactivate the bluetooth on unwanted unit, then
access the bluetooth settings and activate the bluetooth function on the new device
which you wish to pair with your DVD player.