Safety Information

BATTERY INSTALLATIONS (Remote Control)

1. Press the tabs on the battery door and lift it off.

2. Install two (2) x AAA size batteries into the battery

compartment as the ﬁ gure on right and the

polarity markings inside battery compartment.

3. Replace the battery door.

BATTERY PRECAUTIONS

Follow these precautions when using batteries in this device:

1. Use only the size and type of batteries speciﬁ ed.

2. Be sure to follow the correct polarity when installing the batteries as indicated next to

the battery compartment. Reversed batteries may cause damage to the device.

3. Do not mix different types of batteries together (e.g. Alkaline, Rechargeable and

Carbonzinc) or old batteries with fresh ones.

4. If the device is not to be used for a long period of time, remove the batteries to

prevent damage or injury from possible battery leakage.

5. Do not try to recharge batteries not intended to be recharged; they can overheat and

rupture. (Follow battery manufacturer

s directions.)

6. Do not dispose of batteries in ﬁ re, batteries may explode or leak.

7. Clean the battery contacts and also those of the device prior to battery installation.

BATTERY INSTALLATION

REMOTE CONTROL WORKING RANGE

Remarks:

1. When there is an obstacle between the unit and the transmitter, the transmitter may

not operate.

2. When direct sunlight, an incandescent lamp, ﬂ uorescent lamp or any other strong

light shines on the remote control of the unit, the remote operation may be unstable.