Suitcase Turntable with Bluetooth Function MODEL:VSC-550BT PLEASE READ CAREFULLY BEFORE OPERATING THIS EQUIPMENT KEEP IT IN A SAFE PLACE FOR FUTURE REFERENCE
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER SERVICEABLE PART INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. DANGEROUS VOLTAGE: The lighting flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC STATEMENT: This device complies with part 15 of the FCC Rules.
(6) Clean only with dry cloth The appliance should be cleaned only as recommended by the manufacturer. (7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Slots and openings in the cabinet and in the back or bottom are provided for ventilation, to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered.
(15) Power source This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For products intended to operate from battery power, or other source, refer to the operation instructions.
(21) Replacement parts When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original parts. Unauthorized substitutions may result in fire or electric shock or other hazards. (22) Safety check Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.
BEFORE USING THE UNIT As the unit may become warm during operation, always leave sufficient space around the unit for ventilation. The voltage supplied to the unit should match the voltage as printed on the rear panel. If you are in any doubt regarding this matter, consult an electrician. Choose the installation location of your unit carefully. Avoid placing it in direct sunlight or close to a source of heat. Also avoid locations subject to vibrations and excessive dust, heat, cold or moisture.
HANDLING RECORDS Do not touch the record's grooves. Only handle records by the edges or the lable. Make sure your hands are clean. Skin oils from even clean hands can leave a residue on the record surface that will gradually deteriorate the quality of your record. groove label edge Keep your records away from dust. Keep them in a cool, dry place. To avoid dust and scratches, keep records in their sleeves and jackets when not in use. Store records upright on their edges.
HOW TO REPLACE THE STYLUS The stylus should last about 50 hours under normal use. However, it is recommended that the stylus be replaced as soon as you notive a change in sound quality. Caution: Do not remove or bend the sylus. To avoid injury, do not touch the needle. Turn off the unit's power before you replace the stylus. Keep out of the reach of children. Handle with care, as the stylus is delicate. Use of a bent or broken stylus may damage the record and cause the turntable stylus to malfunction.
Location of Controls Turntable and Function Panel 1 2 3 1. Turntable platter 2. Turntable spindle 3. 45 RPM adapter 4. Lever 4 5 PH LINE IN ON INE IN BT O L 6 7 8 9 5. Tone arm holder 6. LINE IN jack 7. Speed selector 8. Function knob 9. Tone arm 10.Power ON-OFF/ Volume knob 11 12 11. Indicators 10 ON OFF INDICATOR HEADPHONE 13 12. HEADPHONE jack 13. Stylus Front View and Rear View 15 14 14. Metallic buckle 15. Handle 16. Speakers 16 16 DC IN LINE OUT L R 17. DC IN jack 18.
Operation General Operation: 1. Open the top cover as the illustrated follows: 2 1 2. Connected the unit to AC power as instructed earlier. 3. Turn the Power ON/OFF--Volume knob clockwise to power on the unit and set the volume to the desired level. The indicator will illuminate. 4. Turn the Function selector to the desired position. 5. When finished listening, turn the Power ON/OFF--Volume knob counterclockwise until “Click” is heard to shut off the unit. The indicators will not light. 6.
Listening through Bluetooth (BT) Bluetooth: For first time use or re-pairing to a new BT Device, pairing it as below: 1. Power on the unit and turn the Function selector to BT position as the instructed earlier. The color of indicator will turn to Blue and blink. 2. Power on the external BT Device and enter to BT searching mode. Start pairing as the on screen instructions on the external BT Device. After paired, the Blue indicator will stop blinking, the tone sound of connected will hear.
Listening a Record 1. In first time use, take off the protective cover from the stylus as the illustrated below: Plastic protective cover (White color) 2. Place the Record on the center spindle. Note: If you are playing a 45 RPM Single (small size record), place the supplied 45 RPM adapter to the center spindle then place the record on it. 3. Slide the Speed selector to 33; 45 or 78 to match the play speed of the record. 4. Unlock the Tone Arm from the holder as the illustrated below: clip 5.
Other Connections LINE IN: LINE OUT: Listen music from the external Audio Player as follows: 1. Connect one end of the Audio Connection Cable to to the Phones Jack; Line Out Jack or AUX Out Jack on the external Audio Player. To listening from external Audio Amplifier: 1. Connect one end of the RCA Audio Connection cable to the Line IN Jacks on the external Audio Amplifier. 2. Connect the other end to the LINE IN Jack on the top of unit as the illustrated below: 2.
Troubleshooting Guide Symptom Possible Cause Solution Power AC/DC Adaptor had not connected to unit or wall outlet No power Power ON-OFF/Volume knob is on power off position Connected the AC/DC Adaptor to the unit an d wall outlet Turn the Power ON-OFF/Volume knob clockwise to power on the unit and set the volume to the desired level Turntable Noise or sound distorted Speed selector wrong setting The stylus may abrasion after long time used Set the Speed selector to the correct posit ion 33; 45 or
General Specifications 9V, 1000mA, Power Source: DC Audio Power: Impendence of Speakers: 1.8 W (RMS) x 2 4 Ohm; 3W x 2 BT Version: BT Effective Range: 4.1 32 feet in open area Turntable: Speed: Type of Stylus: 33; 45; 78 rpm selectable CSC-015 Accessories 1 x User’s Manual 1 x AC/DC Adaptor (Input: AC 100-240V~; 50/60 Hz; 0.
