User's Manual

ManualsBrandsShenzhen Junlan Electronic ManualsAudio EquipmentSOUNDBAR PLAYER

Table Of Contents

PSB322 IM(2) 2013-1-15.pdf

32" SOUND BAR SPEAKER

USER MANUAL

Model:PSB322

PLEASE READ BEFORE OPERATING THIS EQUIPMENT.

Summary of content (12 pages)

PAGE 1
32" SOUND BAR SPEAKER USER MANUAL Model:PSB322 PLEASE READ BEFORE OPERATING THIS EQUIPMENT.
PAGE 2
SAFETY INSTRUCTIONS 1.Read these instructions. 2.Keep these instructions. 3.Heed all warnings. 4.Follow all instructions. 5.Do not use this apparatus near water. 6.Clean only with a slightly damp cloth. 7.Do not block any ventilation openings. 8.Install in accordance with the manufacturer’s instructions. 9.Do not install or operate near any heat sources such as radiators,stoves,or other apparatus that produce heat 10.Unplug this apparatus during lightning storms or when unused for long periods of time. 11.
PAGE 3
FCC NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 4
MOUNTING 1. Follow the figure 1 above to determine the positions where the screws should be mounted. Make sure the two brackets are mounted in the same level. 2. Insert the fixing plugs into the screw holes and insert screws to fix the metal bracket onto the wall.
PAGE 5
3. Hang the unit on the wall Note: The gap between the metal bracket and plastic mounting holder on the rear of the unit is designed for simple mounting, which will make the unit movable.
PAGE 6
PRODUCT OVERVIEW Front View 1 2 6 TUN- TUN+ MODE VOL- 3 4 VOL+ 7 8 AUX IN 1 5 TUN- TUN+ MODE VOL- VOL+ AUX IN 1 9 1. LCD Display 2. Standby/MODE Button 3. Tune- Button 4. Tune+ Button 5. AUX IN1 Jack 6. Remote Sensor 7. Volume+ Button 8. Volume- Button 9. Speakers Rear View AUX 2 AUX IN2 L L R R DC IN ANT S / A1 N :2A1122019200795007050 00 0 0 10 0 0 0 1 AUX 2 AUX IN2 L L R R DC IN 10 11 ANT 11 12 10.DC IN Jack 11.RCA Audio Input Jacks 12.
PAGE 7
Remote Control 1 2 10 MODE 3 FM SCAN 4 5 M+ 6 7 11 TUN- TUN+ EQ CLOCK MO/ST 12 VOL- VOL+ 13 8 BASS- BASS+ 14 9 TREBLE- TREBLE+ 1.MODE Button 2. Standby Button 3. FM SCAN Button 4. TUNE-Button 5. M+(Memory+) Button 6. EQ Button 7. VOL-(Volume-) Button 8. BASS- Button 9. TREBLE- Button 10. Mute Button 11. TUNE+ Button 15 16 12. CLOCK/MO/ST Button 13. VOL+ (Volume+) Button 14. BASS+ Button 15. Play/Pause Button 16.
PAGE 8
POWER CONTROL - To turn the unit on · Connect the supplied power adapter. · Press STANDBY button to turn on the unit. - To turn the unit off · Press STANDBY button on the remote control or hold STANDBY button in the front of the unit. NOTE: If the unit is not used for a long period of time, disconnect the power adapter. TIME SETTING 1. Place the unit to standby mode. 2. Hold CLOCK/MO/ST button on the remote control until the hour digit flashes. 3.
PAGE 9
AUX IN - AUX IN source may include: ·Personal audio players ·Personal computers or laptops - AUX IN connection: 1. Connect a stereo 3.5mm jack cable (supplied) between the headphone or LINE/Audio output of the personal audio player and the AUX IN1 jack on the front of the unit. 2.Power on the unit and press MODE button repeatedly until "AUX1" appears on the display. Set your personal audio player/computer to play.
PAGE 10
RCA AUX IN -RCA AUX IN sources may include ·TV/DVD/VCR -RCA AUX IN connection 1. Connect the RCA audio cable (supplied) to the audio output jack on DVD player and AUX IN 2 or AUX 2 jack on the rear of the unit. 2. Press MODE button repeatedly until "AUX1" (for AUX IN 2 connection) or "AUX 2"(for AUX 2 connection) appears on the display. NOTE: BeforeAUX IN 2 connection, make sure theAUX IN cable is not inserted into the AUX IN1 jack in the front of the unit.
PAGE 11
BLUETOOTH - Paring: 1.Press MODE button repeatedly until "BT" appears on the display. 2. Turn off the Bluetooth functionality of other devices that are paired with your unit. 3. Turn on Bluetooth functionality on your Bluetooth device. Typically, Bluetooth controls are found on the device’s tools or settings menu (see your user manual).Turn on Bluetooth connectivity and make your device “discoverable”. 4. Clean out the paring list on your Bluetooth device. 5.
PAGE 12
SPECIFICATIONS Power source of the remote control................................................ DC 3V, 1x CR 2025 button cell Output of the power adapter....................................................................................... .DC 16V 1.8A Audio output........................................................................................................................ 10W x 2 Power consumption..................................................................................................