Media Center MODEL:WMSMCZ3 --INSTALLATION AND OPERATION MANUAL-PLEASE READ INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE
The lighting flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER S E RV I C I N G TO Q U A L I F I E D S E RV I C E PERSONNEL.
13 ) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture does not operate normally, or has been dropped. 6 ) Clean only with dry cloth Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a dry cloth for cleaning.
FEATURES Digital FM tuner w/10 presets Bluetooth wireless technology 4 zone audio distribution 4 zone video distribution 3.5 mm aux input jack on front panel USB input on front panel w/device charging capabilities Digital Optical input on rear panel 2 analog stereo inputs on rear panel LED backlit controls Wireless remote control included PACKING LIST OPTICAL ZONE A ........ ........ ........ ........ ........ ........ ........ ........
PLACING AND MOUNTING 1. Placing When plaing the media center in any type of enclosed space, be sure to allowe space around it for ventilation. If plaing in a tight space without ventilation, heat generated from the unit could produce a potential heat hazard. 2.
GENERAL VIEW Front View 2 1 3 11 4 9 8 10 7 5 6 6. USB Jack 7. AUX IN Jack 8. Play/Pause/ Preset/ Memory/Preset Play Button 9. PAIR Button 10. SOURCE Button 11. POWER Button 1. LED Display 2. Remote Sensor 3. Previous/Tune Down Next /Tune Up 4. Volume Down Volume Up 5. ZONE A/B/C Button Rear View 1 2 3 4 5 6 8 7 1.TV Audio In Jacks 2.DVD Audio In Jacks 3.Antenna Jack 4.EXT IR (External Remote Sensor) Jack 5.VIDEO Out Jack x 4 9 6.VIDEO In Jack 7.External Subwoofer Connector 8.
SPEAKER/POWER WIRE SOCKET DIAGRAM 10A FUSE A A A A SPEAKER (6X4-ohms) WIRING COLOR CODE GUIDE 12V DC Power Extension CAUTION! Connecting the speakers incorrectly will cause distortion and damage the power amplifier.
REMOTE CONTROL 1. POWER button 8 2. Bluetooth Mode Switch button POWER 1 3. AUX IN Mode Switch button 4. TV Mode Switch button 5. TUNE - / 14 BT USB ZONE B AUX IN FM ZONE C TV DVD 15 2 /TUNE+ button 9 16 3 6. VOL ( Volume )+/- buttons 7. OPTICAL ZONE A ( Play/Pause )/ ( Memory/ Preset /Preset Play )button 10 4 8. OPTICAL Mode Switch button 5 9. USB Mode Switch button 10. FM Mode Switch button 6 11.
BATTERY INSTALLATION--- REMOTE CONTROL Battery Installation 1.Slide and lift the battery door (Figure 1). 2.Install 2 (two) AAA size batteries into the battery compartment as indicated by the polarity markings (Figure 2). 3.Replace the battery door (Figure 3). Battery Precaution Remote Control Effective Range When there is an obstacle between the unit and the remote control, the remote control may not operate properly.
GENERAL OPERATIONS 1. Press the Power button on the unit or remote control to power on the unit from standby mode. 2. Press the SOURCE button repeatedly to switch to desired mode as the following. BT TV AUX FM OPTICAL USB 3. During Playback: ~ Press the VOL (Volume)-/+ buttons to adjust volume level as desired. ~ Press Mute button on the Remote Control to mute the sound on all active zones. Press again to resume.
LISTEN TO FM RADIO 1. Power ON the unit. 2. Press the SOURCE button repeatedly until FM appears on the display. Or press FM on Remote Control. 3. Press and hold the /TUNE - or /TUNE + buttons and then release, The unit will start to search next ( or previous ) available FM radio station then plays. 4. When a station searched, press and hold the റͬറ button to display the desired storage location(such as Pxx.
ADDING OPTIONAL EXTERNAL SUBWOOFER - + NOTE: Before connecting, disconnect power. 1. Connect one end of subwoofer connection cable ( not supplied ) to the "+" Jack on the rear of the unit as the figure above. 2. Connect the other end to the "-" Jack on the rear of the unit as the figure above. 3. Power ON the unit. 4. Play the music as usual and set the desired volume.
CONNECT USING OPTICAL Optical Cable(Not Supplied) DVD or TV NOTE: Before connecting, disconnect power. 1. Connect one end of optical connection cable ( not supplied ) to the optical jack on the rear of the unit as pictured above. 2. Connect the other end to the DVD or TV back panel. 3. Power ON the unit. 4. Press the SOURCE button repeatedly until the "OPTICAL" appears on display. Or press OPTICAL button on Remote Control. 5. Play the music as usual and set the desired volume.
CONNECT TO TV/DVD White MAIN TV Red Yellow Red White Yellow Yellow Yellow Yellow TV 2 TV 3 TV 4 DVD or TV NOTE: Before connecting, disconnect power. 1. Connect as the figure above.(TV 2, 3, 4 are optional to connect) 2. Power ON the unit. 3. Press the SOURCE button repeatedly until "TV" appears on display. TV audio is selected and will play through the unit. Or press TV button on Remote Control. 4. Press the SOURCE button repeatedly until "DVD" appears on display.
AUX IN : LISTEN TO EXTERNAL AUDIO DEVICES To the Phones/Aux Out/Line Out Jack on the external audio device 1. Connect one end of audio connection cable (not supplied) to the AUX IN jack on the front of the unit as pictured above. 2. Connect the other end to the Audio out/Line out/Phone jack on the external player ( such as iPod, iPhone, iPad, MP3 player, Discman... etc. ) 3. Power ON the unit. 4. Press the SOURCE button repeatedly until "AUX" appears on display. Or press AUX IN button on Remote Control.
TROUBLESHOOTING GUIDE Check the following guide before requesting service 6<03720 No power No sound 3266,%/( &$86( 3266,%/( 628/7,21 power cable not connected or blown fuse ~Check fuse ~Check 12V connection Volume in minimum position Raise volume level by pressing the VOL (Volume) + button The connected device is not in playback mode Play the music/movie in the connected device as usual and make sure the volume level of it is in high level Input source incorrect Press the SOURCE button repeatedl
SPECIFICATIONS Operation Voltage...........................................................................................................DC10V-14V Power Supply Requirement................................................................DC 12 Volts, Negative Ground Overall Dimension..................................................................................813(W)x107.2(H)x83(D)mm Max Power Consumption......................................................................................................
www.riverparkinc.com C 2015 RIVERPARK Inc. V.