User's Manual

FM Antenna
2. Press the SOURCE button repeatedly until FM appears on the display.
3. Press and hold the /TUNE - or /TUNE + buttons and then release,
The antenna wire on the rear of the unit is for radio reception. If reception is weak, unwind and
extend the wire or relocate the wire to improve the radio reception.
LISTEN TO FM RADIO
BLUETOOTH PAIRING AND PLAYBACK
3. Turn on the external BT Device and enter BT searching mode. Start
to the user's manual of your BT Device. )
Notes:
display of the external BT Device.
Pairing code "0000" may need to be entered.
Normal operation after paired:
pairing as the screen
instructions on the external BT Player.
( For details pairing procedures, please refer
2. Press the SOURCE button repeatedly until "BT" appears on display and flash.
~
~
Pairing the unit to external BT Device as follows:
Normal operation after paired:
The unit will start to search next ( or previous )
available FM radio station then plays.
5. Press button on remote control to play the preset stored station.
location(such as Pxx.), then press
button to change the storage lacation, press and
A total of 10 stations can be stored into the unit's memory.
hold the button to complete station storage.
When the external BT Device searched the unit, will appear on the
~ Press the VOL (Volume)-/+ buttons to adjust volume level as desired.
ററ
ററ
ററ
4. When a station searched, press and hold the button to display the desired storage
ററ
"WMSMCZ3"
Pairing the unit to external BT Device as follows:Pairing the unit to external BT Device as follows:
1. Power ON the unit.
Or press FM on Remote Control.
1. Power ON the unit.
Or press BT button on Remote Control.
"WMSMCZ3""WMSMCZ3"
and try to pair and connect with other external BT device.
4. After successfully paired and connected, the "BT" on display will stay lit.
Insert the Antenna into
the ANTENNA Jack on rear
panel shown on right picture.
5.Disconnect the current pairing and connection by pressing the PAIR button on the unit or on
remote control,
11