MODEL:SB32 USB OPT FM BT TV DVD AUX --INSTALLATION AND OPERATION MANUAL-PLEASE READ INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE
TABLE OF CONTENTS INTRODUCTION.................................................................................................1 FEATURES..........................................................................................................1 PACKING LIST....................................................................................................1 IMPORTANT SAFETY INSTRUCTIONS.........................................................2-3 PLACING AND MOUNTING...........................................
INTRODUCTION Thank you for choosing a Connexx product. We hope you will find the Instructions in this owner's manual clear and easy to follow. If you take a few minutes to review, you will learn how to use all of the features of your new soundbar stereo for maximum enjoyment. FEATURES Features of the Connexx SB32 soundbar stereo include: Digital FM tuner w/10 presets Bluetooth wireless technology Built-in subwoofer (w/optional external subwoofer as an add-on accessory) 3.
The lighting flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER S E RV I C I N G TO Q U A L I F I E D S E RV I C E PERSONNEL.
13 ) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture does not operate normally, or has been dropped. 6 ) Clean only with dry cloth Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a dry cloth for cleaning.
PLACING AND MOUNTING 1. Placing on the table When placing the Sound Bar on an entertainment center, bookshelf, or any type of enclosed space, be sure to allow space around the Sound Bar for ventilation. If the Sound Bar is enclosed in a tight space, without ventilation, heat generated from the Sound Bar could produce a potential heat hazard. 2. Mounting the Sound Bar onto a wall We recommend having this Sound Bar professionally mounted.
GENERAL VIEW Front View 1 12 2 4 5 6 7 8 9 10 11 3 1. LED Display 2. AUX IN Jack 3. USB Jack 4. PREVIOUS/TUNE Down 5. Volume Down 6. Play/Pause/ Preset/ Memory/Preset Play Button 7. NEXT/TUNE Up 8. Volume Up 9. PAIR Button 10. SOURCE Button 11. POWER Button 12. Remote Sensor Rear View 1 2 3 4 5 1.ANTENNA Jack 2.DVD Audio In Jack 3.TV Audio In Jack 4.Subwoofer Switch 6 7 5.External Subwoofer Connector 6.Optical In Jack 7.
REMOTE CONTROL POWER OPTICAL 1 7 BT USB FM AUX IN DVD TV 8 9 റͬറ PAIR MUTE 10 11 2 3 4 റͬറTUN- റͬറTUN+ VOL- VOL+ 5 12 13 6 1. POWER button 2. Bluetooth Mode Switch button 3. AUX IN Mode Switch button 4. ( Play/Pause )/ ( Memory/ Preset /Preset Play )button 8. USB Mode Switch button 9. FM Mode Switch button 10. TV Mode Switch button 11. DVD Mode Switch button 12. MUTE button 13. PAIR button 5. TUNE - / /TUNE+ button 6. VOL ( Volume )+/- buttons 7.
BATTERY INSTALLATION--- REMOTE CONTROL Battery Installation 1.Slide and lift the battery door (Figure 1). 2.Install 2 (two) AAA size batteries into the battery compartment as indicated by the polarity markings (Figure 2). 3.Replace the battery door (Figure 3). Battery Precaution Remote Control Effective Range When there is an obstacle between the unit and the remote control, the remote control may not operate properly.
GENERAL OPERATIONS 1. Press the Power button on the unit or remote control to power on the unit from standby mode. 2. The default mode is "FM". Press the SOURCE button repeatedly to switch to desired mode. Follows the order below: USB OPT FM BT TV DVD AUX 3. During Playback: ~ Press the VOL (Volume)-/+ buttons to adjust volume level as desired. ~ Press Mute button on the Remote Control to mute the sound, press again to resume. 4. When finished listening, press the Power button to power off the unit.
LISTEN TO FM RADIO 1. Power ON the unit. 2. Press the SOURCE button repeatedly until FM appears on the display. Or press FM on Remote Control. 3. Press and hold the /TUNE - or /TUNE + buttons and then release, The unit will start to search next ( or previous ) available FM radio station then plays. 4. When a station searched, press and hold the റͬറ button to display the desired storage location(such as Pxx.
ADDING OPTIONAL EXTERNAL SUBWOOFER - + NOTE: Before connecting, disconnect power. There is a SPEAKER SELECTOR on the back of the unit to turn on or turn off the internal subwoofer output or external subwoofer output. IN(Internal subwoofer)-- When the switch is moved to "IN" position, there will be no audio output from the external subwoofer. EX(External subwoofer)- When the switch is moved to "EX" position, there will be no audio output from the internal subwoofer. 1.
CONNECT USING OPTICAL Optical Cable(Not Supplied) DVD or TV NOTE: Before connecting, disconnect power. 1. Connect one end of optical connection cable ( not supplied ) to the optical jack on the rear of the unit as pictured above. 2. Connect the other end to the DVD or TV back panel. 3. Power ON the unit. 4. Press the SOURCE button repeatedly until the "OPT" appears on display. Or press OPTICAL on Remote Control. 5. Play the music as usual and set the desired volume.
CONNECT TO TV/DVD White White Red Red White Red DVD NOTE: Before connecting, disconnect power. 1. Connect as the figure above. 2. Power ON the unit. 3. Press the SOURCE button repeatedly until "TV" appears on display. TV audio is selected and will play through the unit. Or press TV on Remote Control. 4. Press the SOURCE button repeatedly until "DVD" appears on display. DVD audio is selected and will play through the unit. Or press DVD on Remote Control. 5.
AUX IN : LISTEN TO EXTERNAL AUDIO DEVICES 1. Connect one end of audio connection cable (not supplied) to the AUX IN jack on the front of the unit as pictured above. 2. Connect the other end to the Audio out/Line out/Phone jack on the external player ( such as iPod, iPhone, iPad, MP3 player, Discman... etc. ) 3. Power ON the unit. 4. Press the SOURCE button repeatedly until "AUX" appears on display. Or press AUX IN on Remote Control. 5.
TROUBLESHOOTING GUIDE Check the following guide before requesting service 6<03720 No power No sound 3266,%/( &$86( 3266,%/( 628/7,21 Power cable not connected or blown fuse ~Check fuse ~Check 12V connection Volume in minimum position Raise volume level by pressing the VOL (Volume) + button The connected device is not in playback mode Play the music/movie in the connected device as usual and make sure the volume level of it is in high level Input source incorrect Press the SOURCE button repeatedl
SPECIFICATIONS Operation Voltage...........................................................................................................DC10V-14V Power Supply Requirement................................................................DC 12 Volts, Negative Ground Overall Dimension..................................................................................813(W)x107.2(H)x83(D)mm Device and Accessories Net Weight.............................................................................2.2kg(4.
www.riverparkinc.com C 2014 RIVERPARK Inc. V.
