User's Manual

— 10 —
Operation
Playing a CD (Continued)
14
PROGRAM: You can program up to
20 tracks on any disc for playback
in any desired order. While in the
Stop mode, press the REPEAT/
PROGRAM button; the Program
indicator will blink and “00” will
appear. Select the first track using
the Skip Back 9 /Skip Forward
: buttons. Press the REPEAT/
PROGRAM button again to confirm
the entry. After selecting the
desired tracks the display will show
01, 02, etc. recognizing the tracks
selected have been programmed
and the program indicator will
illuminate solid red. Repeat to set
up to 20 tracks into memory. When
done, press the Play/Pause
button to start playback.
Note:
• Press the Stop </Pair button TWICE
to stop and clear the program.
15
PAUSE: During playback, if you
wish to pause the disc momentarily,
press the Play/Pause button;
the PLAY/PAUSE indicator will
blink. Press again to resume normal
playback.
16
Press the Stop </Pair button to
stop playback.
17
Press the power ON/OFF button to
turn the unit off.
1141
14
15
16
17