User's Guide

User Guidelines

Smart Chime is a Wi-Fi 2.4ghz accessory that receives control signals of device and could

send loudly prompt music after receiving device commands. The chime is adapted to a Standard

outlet and plays real-time notifications for doorbells.

Click the Rest Button

Loop to change the volume level.

Duoble Click the Rest Button

Loop to change the local melody.

Hold the Rest Button

Hold the rest button for 5 seconds to change to pairing mode.

Support

Wi-Fi 2.4GHz 802.11 b/g/n

100-240V ~ 50/60Hz 0.3A

Indoor dry location use ONLY

Quiuick Start Guide

1. Go to the device to a add accessory, “Settings” -> “Accessory” -> “Add Accessories” or “+”.

Reset Button

PAGE 1
User Guidelines Smart Chime is a Wi-Fi 2.4ghz accessory that receives control signals of device and could send loudly prompt music after receiving device commands. The chime is adapted to a Standard outlet and plays real-time notifications for doorbells. Reset Button Click the Rest Button Loop to change the volume level. Duoble Click the Rest Button Loop to change the local melody. Hold the Rest Button Hold the rest button for 5 seconds to change to pairing mode. Support Wi-Fi 2.4GHz 802.
PAGE 2
. Hold the button of the accessory for 5s to enter pairing mode. 3. Follow instrucions from App and accessory prompts, then complete the process. Tip: If you encounter any problems during the use of the product, please contact support@irevolo.com. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
PAGE 3
- Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This device complies with FCC radiation exposure limits set forth for an uncontrolled environment.