Installation Instructions

General Instructions for Fan Lamps
Must read before installation：
（！ATTENTION！）
1. To ensure safety in use, please have professionals install, inspect
and repair it. If you don’t know installation, please have a professional
electrician install it.
2. The fan light must be installed or removed after the power is off.
3. When the ceiling fan is installed, screws of each part must be firmly
fixed.
4. When the ceiling fan rotates, no object should touch the blade to
avoid danger.
5. If there is any problem with the product, please contact the store
customer service first, we will provide you with considerate service.
Installation steps:
1. When installing this product, first cut off the power. Then determine
the installation plan and the ceiling weight.
2. According to the hole position of the hanging board(cross), drill the
installation holes on the ceiling and insert expansion bolts, and fix the
hanging board(cross) on the ceiling with tapping screws to make sure
the installation is firm. (Figure 1)
3. Connect the neutral and live wires of the power cord to the
neutral(N) and live(L) wires of the drive power supply in the chassis.
Then wrap them with electrical tape for insulation.(Figure 2)
4. Align the notches of the chassis with the hanging board screws
and screw them in place.
5. Tighten the screws of to the hanging board(cross) . Make sure the
installation is firm. (Figure 3)
6. After the installation is complete, make sure the installation is
correct before connecting to the power supply for normal use.
7. When power on, use the remote control (2x AAA batteries need to
be additionally purchased) to check whether the light or fan of the
device could work normally.
(Note: The product shape in this manual is for reference only, the
actual product shall prevail)
Tips：
1. The ceiling fan does not rotate:
(1) Check whether the power line poor contact.
(2) Check whether the fan power supply voltage is normal.
2. Fan noise:
(1) Check whether all screws are fully tightened on cross hanging
plate.
(2) Check whether there is friction between other motors when they
run.
Method of controlling lamps:
1.Wall Switch:Neutral light →Cool white light →Warm light.
2.Remote Control (Without Battery in the Package)：
(1)Remote control distance: 8-20 meters.
(2)Remote control battery: AAA
Batteries X 2.
(3)Pairing the remote control with
the fan light:
① Turn on the power, press and
hold the pair code button for a
long time within 5 seconds of the
light on.
② When you hear a beep or a
light flashes, the code match is
successful.
③ If you need to match the code
a second time, you need to wait
30 seconds before turning on the
power and repeat the above operation.
3.Phone App
COMPANY NAME:XINYIDA LIGHTING ELECTRICAL APPLANCE CO,LTD
ADD:NO6 EAST HUASHENG ROAD,CAO THREE INNOVAION PARK,
GUZHEN,ZHOUSHAN CITY,GUANGDONG PROVINCE,CHINA
TEL:[phone]