User's Manual

Network Table Connection:
Step 1: Click “add camera”
Step2: Click “add by network table”
Step 3: Enter device name and click scan QR code.
Step 4: Scan QR code.
Step 5: After scanning, APP will search device automatically until connection,
Step 6: After connection, the monitor view is live.
Put QR code in front of the camera
within 5-10 cm. If the scan was
completed, you can hear “beep” sound.
⑻
⑼
After connection, the monitor
view is live.
When LED light turns green, it
means connection is completed.
Click “add by network table”
Click “add camera”
⑶
⑵
⑴
Enter device name and click
scan QR code.
⑺