User's Manual

Reset button
Step1: Press the reset button 5-10 seconds with needle at the bottom of the Fixture.
(The bulb will turn on, and you will hear “Ding Ding Ding” sound, finally the Led will turn to
flashing red.)
Step2: Reset completes.
Warning/Caution
Read this guide carefully and keep it for future reference
Follow all instructions for safe use of the product and handle with care
Use the camera within given temperature, humidity and voltage levels noted in Camera
Specifications
Do not disassemble the camera
Do not point the camera directly towards the sun or a source of intense light
Periodic cleaning may be required. Use a damp cloth only. Do not use harsh cleaners or
aerosol cleaners.
Support
Need Help?
Visit our official website to get more support.
Go to www.annke.com
and search your device model number.
Click product in the search list to download what you need.
Press this reset button for 5 ~ 10
seconds with the pin