User's Manual
.6'%ཏྮବઐฌרെĩข୍შĩզķ[PPĩᆼঙզķ[PP
48 Ringtones
5 Volume levels
Night light
Ringtone rhythm lamp
Long range transmission
Free combination pairing
85~97dB
Loudspeaker
.H\+LJKOLJKWV 3K\VLFDO6WUXFWXUH
5HFHLYHU
Front BackSide
Doorbell
button
Infrared
Sensor
( Different countries use
different plug standard )
Door Magnet
1RWH7KHVHWZRVHQVRUVDUHQRWLQFOXGHG
DQGVKDOOEHVHSDUDWHO\RUGHUHG
7UDQVPLWWHU
,QVWDOODWLRQ
Tip: If return to the first ringtone quickly, please
press and hold the receiver’ s
select ringtone
key and plug-in the socket, the receiver will produces
“Di” sound to restore the factory default settings.
,QVWDOODWLRQDQG8VHU*XLGH
ø
Select ringtone key
û
AC plug
ü
40mm
loudspeaker
ù
Night light setting key
ú
Volume setting key
Doorbell function
Private doorbell
2.2.2 Press
key to set volume level: 4、3、
2、1、mute ( only flash LED light )
2.3.1 Normal doorbell function: After pressed the
doorbell button, the receiver plays the selected
ringtone and the LED lamp flashes according to the
ringtone.
2.2.3 Press
key to set 7 levels of brightness:
OFF、1、2、3、4、5、6.
'DLO\XVH
3DLULQJ)XQFWLRQ
1) Press and hold
volume button for ~ 3
seconds and enter into learning code mode, the LED
will lights up and the receiver will produces “Du”
sound, then release it.
1.) Press
ringtone selection key of the
receiver to choose a “special ringtone
„
.
2.) Press and hold
ringtone selection key
for ~ 3 seconds enter into learning code mode,
the LED will lights up and the receiver will
produces “Du” sound, then release it.
3.) Press device button (or trigger the door magnet
/ the infrared sensor), the receiver will produces
“Du” sound to indicate the pairing is successful.
When the device is paired with this method, the
receiver plays the “special ringtone” which is not
affected by the ringtone selection key.
2) Press the device button (or trigger the door
magnet / the infrared sensor), the receiver will
produces sound “Du” to indicate the pairing is
successful.
1RWH
Only 1 transmitter/1 sensor can be paired
once at a time. If more than 1 pairing, please
repeat the above pairing method.Each receiver can
pair up to 32 transmitters/sensors. If 1 transmitter
controls multiple receivers, please repeat the above
pairing method.
4.1.2 Non-professional shall not dismantle the
device for repair to avoid precision electronic
components damage.
3.5 Environment operating temperature:
Receiver: -20~70℃
Doorbell button: -40~70℃
Receiver: -20~70℃
Doorbell button: -40~70℃
3.6 Environment operating humidity:
3.7 Storage temperature:
c3UHFDXWLRQVDQG7URXEOHVKRRWLQJ
1RUPDO'RRUEHOO3DLULQJ0HWKRG
3ULYDWH'RRU3DLULQJ0HWKRG
Press and hold
volume key for ~10 seconds,
the receiver will produces “DuDuDu” sound, then all
pairing will be deleted automatically.
3.1 Doorbell volume : 85~97dB
3.3 Receiver operating voltage: 80~275V
Standby power consumption: 100mW
3.4 Transmitter waterproof : IP54
3.2 Working frequency: 433.92MHz
Wireless range: Open space ~ 400m,
40m~80m indoor with obstacles.
c7HFKQLFDOVSHFLILFDWLRQV
$//3DLULQJ5HVHW)XQFWLRQ
3UHFDXWLRQV
4.2.1 The doorbell does not ring.
4.2.2 Short range transmission:
Please follow below troubleshooting guides for
self-check otherwise contact customer service for
further assistance if necessary.
7URXEOHVKRRWLQJ
1） Check whether the receiver is plugged in properly;
2）Not recommended to plug the receiver into
sockets near routers, computers, water tank
motors, etc. with strong interference signal.
2） Check whether the receiver is in silent mode.
3） For unpaired case, reset to re-pairing.
Receiver: < 90% RH
Doorbell button: <95% RH
Battery type : CR2032 (included)
Battery lifespan: 300K presses, 6~10 years
( assume press 30 times/day )
.6'%
Wireless Doorbell
Waterproof Long range
Low temperature resistance
User Manual
)LJXUH
,QVWDOODWLRQSRVLWLRQ
Figure: Screw assembly method
&5
%DWWHU\
2.1.4 After plug into a suitable socket, test and setup
the receiver. The factory default settings of receiver
are in maximum volume and night light off mode.
)XQFWLRQDOVHWWLQJV
I
Tape Pasting Method:
正面
反面
Batteries life span is ~ 6 to 10 years and rarely
for batteries replacement.
IP54 waterproof, low temperature resistance,
suitable expose to outdoor rain and snow weather.
Advanced wireless technology, long distance
transmission, suitable for grand houses or
heavy duty anti-theft doors.
Extra detailing functions: Power-off memory
function, privacy button, ultra-low power
consumption, pairable wireless sensors.
Workable areas: Private houses, villas, schools,
companies, hospitals and etc..
Physically simple and elegance.
Ringtone rhythm lamp and loudspeaker which
are aesthetically and acoustically pleasant.
Feel extra comfortable when lite up gently at
night time.
2.1.1 The device shall be
installed at an appropriate
height near the door on a clean
wall surface. It is recommend-
ed to install transmitter button
on the wall to avoid wireless
signal interference instead of
mount at a metal door.
2.1.2 Take out one side of double-sided tape liner
(together with the device) and attached to provided
surface of the device. After remove another side of
the liner, attach the device at a proper position on
the wall/door. Please press the device for 30
seconds continuously before release.The tape will
more firmly adhered.
2.1.3 Please use a screw to fix the device if the
tape is not adhere to the wall firmly.
2.2.1 Press
key to select ringtone for preview
the doorbell ringtone at first 10 seconds with 48
ringtones selection.
2.3.3 Detection reminder function: Like pairing door
magnet/ infrared motion sensor, the sensor will be
triggered same as when press the wireless doorbell
button.
2.3.2 Private doorbell function: After the private
mode of the doorbell button is pressed, the receiver
plays preset the doorbell ringtone as per initial
paired bonding setting, this ringtone is not affected
by the
ringtone selection key.
2.3.4 Night lamp function: After press the button
, the device’ s LED lamp will light up gently,
feel warm and safe if the surrounding is in dark
condition.
1 receiver to 1 transmitter has already been paired
in factory and could use it directly. If requires 1
receiver with 2 transmitters, or 2 receivers with 1
transmitter, or multiple receivers with multiple trans-
mitters or other options, please do the pairing
accordingly.
Set the private doorbell button and choose a “spe-
cial ringtone
„
to remind the owner if use in a
private door for go in and out. The pairing method is
as follows:
4.1.1 Proper use can prolong this device lifes-
pan.
Tips: Support up to 32 private buttons corre-
sponding to 32 ringtones; Suggest for the door
magnet / the infrared sensor to choose an alarm
sound to realize the two-in-one function of doorbell
and alarm.
3）Radio signal transmission diffracts through
barriers such as walls which expects normal if
the signal transmission range is reduced signifi-
cantly. Please adjust the receiver or transmitter
button position accordingly.
1）Not recommended to install the doorbell button
near to any metal object which blocks the wireless
signal.
Pre-alert detection
function （optional）
c
5HSODFHWKHEDWWHU\
Disassemble the panel
Remove the battery cover shell with a slotted
screwdriver to replace the battery (Leave positive
pole of the battery upwards), fix and lock the
battery cover then cover the panel
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1)This device may not cause harmful interference, and (2) this device must accept any
(2)interference received, including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
FCC WarningFCC WarningFCC WarningFCC WarningFCC Warning