User's Manual

It takes around 90 mins to get 100% charge, when the red lights turn into green, indicating the
charging is completed.
If not in urgent need, please wait until charging complete before unplugging, because after
charging, the protection circuit will perform flow equilibrium
Battery level: A ten-bar LED indicator is used to indicate battery level. All ten-bar LED will light
up when power level is more than 85% and will go off one by one as the level decreases.
Please check power level before usage to ensure there is enough power for the return trip.
When power level is lower than 5%, all lights will flicker and the buzzer will sound off. The front
part of the treadle will descend to force you to decelerate and eventually stop. Please do not
restart when this occurs to avoid any accidents.
Sustained range will decrease during winter. This is because the battery performance
decreases quickly in cold conditions. In -15℃, for example, battery performance is only about
half in comparison to that in room temperature.
6. Care and Maintenance
6.1 Conservation
Don’t place the unicycle in a wet condition
If left unused, recharge the battery at least once a month to avoid the battery exhausted and
maintain longevity of the battery. Meanwhile, the battery can’t be dismantled arbitrarily, in case
of changing, pls contact us, we will provide you with professional services
Clean the unicycle with wet cloths and detergent, gasoline, solvent or any other chemical
reagent are forbade.
Use the inflation tube to inflate the tire. Without the tube, you will not be able to pump air into
the wheel.
6.2 Change tire
Allen driver and cross screwdriver are require to change tire
Unscrew all the screws on the body shell with cross screwdriver, 7 screws each side.
There are 6 screws on each side under the treadles, unscrew the six hex socket screws on the
opposite side of the charger slot, pls notice that never unscrew the hex socket screws on the