User Manual

speaker will emit a tone to indicate that the KTS-86 is now powering off.
Reconnect to Bluetooth
 You only need to pair your Bluetooth device with the KTS-86 once.
 With your previously paired device’s Bluetooth turned on and in range, power on the
KTS-86.
 The speaker will automatically reconnect to the last Bluetooth device it was connected to.
 If you have a previously paired device that does not auto-reconnect, navigate to the Bluetooth
settings menu on your device, turn on the Bluetooth feature, and select “KTS-86” from your
list of paired Bluetooth devices.
Play
 Connect your device to the KTS-86 over Bluetooth or through the AUX input..(refer to the
“Pair & Connect” section)
 Open your favorite music app and press play.
 You can control the music ,volume ,and tracks from your device, as well as control the
playback and volume from the speaker: Volume on your device and on the speaker are
controlled separately.
 Press the play button to play/pause music, or to answer/end phone calls. Press the “+”or
“-“buttons to adjust volume.
 Speaker will emit a tone when the maximum or minimum volume on the speaker has been
reached. If volume is still too low, you can also adjust the volume on your device.
 All audio, including music, games, videos, and notifications will be routed through the
KTS-86.
Product Diagram
PLEASE NOTE:
Speaker is not water resistant when the silicone cover is closed and secure before using in a wet
environment.