User Manual

Important Waterproof /Safety Information
IMPORTANT:DO NOT submerge the KTS-86 in water. This device is not intended to function
properly after being under water.
 Before using the KTS-86 in a wet environment, make sure the silicone cover over the AUX
and micro USB input ports on the back of the speaker is fully closed and secured. If water
gets into either port, the speaker may not function properly
 The speaker is rated IPX4.which means the speaker can be splashed with water or left in the
rain (but not submerged in water) for approximately 5 minutes.
 If the KTS-86 gets wet, it is recommended that you dry the speaker completely before using
it again.
 All actions done with the KTS-86 are done at your own risk. While the speaker is
weather-proof and has a protective silicone case, it is not a guarantee for complete damage
protection.
Specification
Output Power:3W
Speaker Driver Size:45mm
Impedence:4 Ω
Frequency Response: 15Hz to 18 KHz
Waterproof Level: IPX4
Battery Information:
Built-in Battery: Lithium –ion
Input: DC 5V/1A
Battery Capacity: 400mAH
Music playing time: Up to 6 hours
Standby time: Up to 24 hours
Charging time：2hours
Approximate playback time. Battery life depends on individual use and may be slightly more or
less than the time specified.
Bluetooth Information
Bluetooth Specification: V2.1+EDR
Operating Distance:10 Meters
System Requirements: Bluetooth –capable device
Additional Connection Sources:
Audio: 3.5mm AUX cable
Power Souce:Bulit-in rechargeable battery or via USB cable.