User Manual

ManualsBrandsShenzhen KingBoard Technology ManualsAudio EquipmentBluetooth Speaker

REV: A 20140510

Item

Bluetooth speaker

Description:

KTS-88 it is the 2 times 3W Bluetooth speaker, With A2DP and Handfree .

Remark:

1. keep out of reach of children!

2. Pls use the original accessories

3 .If unit have problem, pls contact with the seller.

Disassemble the unit by User is not allow

4. Keep

good ventilated environment when charge the unit, do not keep near inflammables, oxidizers

and explosive

B. Specification:

1. Size：197*61*70MM

9. Charge port: Micro USB

2. Weight：--- g

11. Aux in jack：3.5MM

3. Battery output：DC3.7 ~ 4.2V

12. Amplifier：

Class D power amplifier

4. Charge input：DC 5V-600mAh

13. Bluetooth effective distance：10M

5. Battery capacity：600mAh

14. Microphone: effective distance 50CM

6. Speakers Driver： 3W*1+Radiator passive

15. Working/Playback Time @ 50% volume:

4 hours

Summary of content (4 pages)

PAGE 1
REV: A 20140510 Item: Bluetooth speaker Description: KTS-88 it is the 2 times 3W Bluetooth speaker, With A2DP and Handfree . Remark: 1. keep out of reach of children! 2. Pls use the original accessories 3 .If unit have problem, pls contact with the seller. Disassemble the unit by User is not allow 4. Keep good ventilated environment when charge the unit, do not keep near inflammables, oxidizers and explosive B. Specification: 1. Size：197*61*70MM 9. Charge port: Micro USB 2. Weight：--- g 11.
PAGE 2
ShenZhen Kingboard technology Co.,ltd REV: A 20140510 7. Bluetooth Ver.: 2.1+EDR 16. Frequency Response：150hz-18khz 8. Charging time：2 hours 17. Speaker size: 40MM Operation guide A: Connect to the Bluetooth device 1 .Turn on unit firstly, KTS-88 will have the indicate tune, the Indicate LED is "BLUE". Turn on the Bluetooth function on your mobile or other device and search for the speaker, model name "KTS-80". Then Pair the device.
PAGE 3
ShenZhen Kingboard technology Co.,ltd REV: A B:“+” Short press： 1、 Aux in Mode：No function 2、Bluetooth mode：change to the next track 3, USB and Micro SD model: Change to the next track Long press： 1、Aux in mode: Increase the volume 2、Bluetooth mode：Increase the volume 3, USB and micro SD model: Increase the volume C.
PAGE 4
ShenZhen Kingboard technology Co.,ltd REV: A 20140510 Function: Aux-in Change to the Aux in mode, and Using the audio cable connect to the unit Aux in Jack, it will automatically shift its status and will become AUX-IN. Long time press the"- " and "+" button to decrease and increase the Volume. Charging Plug the USB cable into speaker MICRO USB port and connect to power source. Red LED will on when charging. When charging is complete, the red LED will be off.