User's Manual

ManualsBrandsShenzhen KingBoard Technology ManualsAudio EquipmentBLUETOOTH SPEAKER

Shenzhen KingBoard Technology Co., Ltd.

Bldg. A, Dakanglong Industry Zone Dabuxiang, Guanlan,Shenzhen,

China

Bluetooth Speaker

MODEL NO.: KTS-170A

Specification:

Product Size: 60*60MM

Impedance: 4ohm

Rated Power:3W

Bluetooth Parameter

Bluetooth version : V2.1+EDR

Operation Frequency: 2. 400GHz -2. 480GHz

Power Output (peak): Class 2/4 dbm

Operation Range: 10M

Battery Parameter

Capacity： 300mAh, Polymer Li-ion Battery

Music Playback time： 2.5 Hours at 70% volume

Charging voltage： DC5V/300MA

Charging Time： 2hours

Accessory：

USB charging cable: 1 piece;

3.5MM audio cable: 1 piece;

User manual: 1 piece

Connect to Bluetooth device

Turn on the speaker unit and the Bluetooth switch on your mobile or other device and search for

the speaker model name "BT107".Pair the device.

Once device is paired Bluetooth will automatically connect when unit is turned on subsequently.

Answer a call with hands free function:

When a call comes through, press “ ” to get through the call. The speaker includes a

Summary of content (4 pages)

PAGE 1
Shenzhen KingBoard Technology Co., Ltd. Bldg. A, Dakanglong Industry Zone Dabuxiang, Guanlan,Shenzhen, China Bluetooth Speaker MODEL NO.: KTS-170A Specification: Product Size: 60*60MM Impedance: 4ohm Rated Power:3W Bluetooth Parameter Bluetooth version : V2.1+EDR Operation Frequency: 2. 400GHz -2. 480GHz Power Output (peak): Class 2/4 dbm Operation Range: 10M Battery Parameter Capacity： 300mAh, Polymer Li-ion Battery Music Playback time： 2.
PAGE 2
microphone to allow you to answer the caller. Press “ of talking. ”'again to hang up the call when end Bluetooth Turn off the speaker, It come into the Bluetooth model directly .After pair the device, it can play the music, Short time Press the " Prev and Next. Long time press the" / Volume. " to Play/Pause, press the " / "and the " / " to " and " / " button to turn down and turn up the AUX-IN AUX-IN, Using the audio cable into AUX solt, it automatically shift its status and into Aux model.
PAGE 3
NOTE: connected the cable into AUX Port can received the FM radio clearly. Beacuse it is the same function as antenna Charging Plug the USB cable into speaker MICRO USB port and connect to power source. Red LED on panel when charging. When charging is complete, the red LED will be off. FCC Warning Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
PAGE 4
• Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modiﬁcations to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules.