Bluetooth Speaker with calendar RECHARGEABLE WIRELESS BATTERY ALARM SNOOZE CLOCK BUTTON DC-1012 USER’S MANUAL
Important Safety Precautions When using your Vivitar Bluetooth Speaker Clock, basic safety precautions should always be followed, including the following: 1. READ ALL INSTRUCTIONS BEFORE USING YOUR SPEAKER. 2. Do not use your speaker near water. Clean using a soft cloth or paper towel. 3. Do not place your speaker on any wet surfaces. 4. Do not allow children or the infirm to play with your speaker without adult supervision. 5. Do not expose your speaker to excessive heat, flames or fire. 6.
Introduction Thank you for purchasing your Vivitar Bluetooth Speaker Clock, item V60030BT. You can use your speaker with iPads, iPhones, iPods and many other types of smartphones and Bluetooth devices to stream music. In order to get the best results when using this device, please read this manual first before using. Package Contents -Vivitar V60030BT Bluetooth Speaker Clock -Micro USB Charging Cable -User’s Manual with Warranty Information Specifications Bluetooth Version: V3.
A Quick Look at Your Device DOWN LED Indicator Light Micro USB Charging Port UP SET ON/OFF Switch MODE Front View Rear View
Charging Your Speaker Your speaker has a built-in, rechargeable lithium ion battery. To avoid damage, do not attempt to remove the battery. The full performance of the battery is only achieved after a few charging-discharging cycles. Charge the battery fully before first use. To do so, follow the steps below: 1. Connect one end of the included micro USB charging cable to the Micro USB Charging Port on the rear of your speaker.
Pairing Your Speaker with a Bluetooth Device Your speaker can be paired with most Bluetooth devices including iPads, iPhones, iPod Touches, and most smartphones, laptops and tablets. In order to pair your speaker with a phone, follow the steps below: 1. Slide the On/Off Switch to the ON position in order to turn on your speaker. The LED Indicator Light will start alternately flashing red and then blue repeatedly. This indicates that your earbuds are in pairing mode. 2.
Using Your Speaker: Listening to Music Powering Your Speaker On and OFF 1. Slide the On/Off Switch to the ON position in order to power on your speaker. If you have already paired your speaker to your Bluetooth device, they will automatically remain paired each time you power on your speaker. 2. Slide the On/Off Switch to the OFF position in order to power off your speaker. Listening to Music • Button: Press to play or pause a track. • Quickly tap the “ ” button to advance to the next song in a playlist.
Using Your Speaker: Setting the Date & Time 1. Press the MODE button repeatedly until the symbol “TIME” is displayed in the upper right hand corner of the display screen. 2. Press the SET button to enter the date and time settings mode. 3. Press the DOWN or UP buttons to increase or decrease a setting. Press the SET button to confirm a setting and move to the next setting. 4. In the date and time settings mode you can adjust the hour, minute, year, month and day. .
Using Your Speaker: Setting the Alarm Clock 1. Press the MODE button repeatedly until the symbol “AL” is displayed in the upper right hand corner of the display screen. 2. Press the SET button to enter the alarm setting mode. 3. Press the DOWN or UP buttons to increase or decrease a setting. Press the SET button to confirm a setting and move to the next setting. 4.
Using Your Speaker: Turning the Alarm On 1. Press the MODE button repeatedly until the symbol “AL” is displayed in the upper right hand corner of the display screen. 2. Press the DOWN and UP buttons repeatedly to choose between turning on the alarm ( itself, or turning it on with snooze ( and ) or turning it off. 3. To stop the alarm from going off, press either the MODE, DOWN, or UP buttons. 4. Unless stopped, the snooze function will remain on until it has rung 4 times.
Using Your Speaker: Additional Functions Temperature Display When the symbol “TIME” is displayed in the upper right hand corner of the display screen, press the DOWN button repeatedly to select between °C and °F. If the “TIME” symbol is not on the screen, press the MODE button repeatedly until it appears.
Maintenance and Care -Before using your speaker, inspect the ports to make sure that they are clear of dust and debris before charging or inserting any cables. -Use a soft cloth to clean your speaker. Never use any harsh chemicals or detergents. Make sure your speaker is dry before using. -When your speaker is not in use, it should be stored in a cool, dry place. -Never tug or yank on the USB charging cable while it is connected to your speaker. Connect and disconnect cables as carefully as possible.
FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Vivitar One Year Warranty This warranty covers the original consumer purchaser only and is not transferable. This warranty covers products that fail to function properly UNDER NORMAL USAGE, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year.
Vivitar One Year Warranty (continued) NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OTHER THAN THOSE EXPRESSLY DESCRIBED ABOVE SHALL APPLY. DISTRIBUTOR FURTHER DISCLAIMS ALL WARRANTIES AFTER THE EXPRESS WARRANTY PERIOD STATED ABOVE. NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR ENTITY WITH RESPECT TO THE PRODUCT SHALL BE BINDING ON DISTRIBUTOR.
