User's Manual

external equipement cable.

Step II:Use small vacuum cleaner which connected to the mouth to absorb the dust on the

buttons、other parts of the gap.

Step III:Use dry cloth with slightly damp to wipe the surface of case,please don’t drop any

detergent into the machine to avoid short-circuit due to damaged.

Step Four: Switch on the power until UMPC completely dry

※ Inundated Treatment

※ Don’t start UMPC rashly,otherwise it will lead to UMPC serious damaged.

Remove the power adapter and battery of UMPC,if have external or※

removable parts of the module(such as CD-ROM、floppy drive、extend

memory),are removed together.

Throw the dirty water out of the UMPC,using the wet tissue or soft cloth to ※

wipe the dirt out and avoid wear surface.

※ Use fans to dry the UMPC and parts,and send it to the service station by

trained professional engineers to deal with at the first time to reduce the

damage minimum.

※ Don’t use hair dryer,in order to avoid distortion due to high temperature.

Special remind:If the bag is damaged by water soaking,don’※ t use it to carry UMPC to

repair,in order to avoid second damage.

※ Other matter

If the screen for UMPC on both sides of the card※ -style mortise design,recommend you to

force the same at the both sides when you open it,in order to advoid fracture due to the

uneven application of force.

When you put UMPC into your bag,please remember to fasten the inside belt,in order to ※

avoid falling UMPC down and damaging due to open inadvertently.

Please don’t exposure the UMPC in the overheated environment,suc※ h as the

car inside、in order to avoid premature aging of electronic components.

※ Backup the important data of hard disk regular, it will avoid the