User's Manual

31
When the ultra-mobile computer to connect the battery (and did not connect
the transformer), open the power supply, the power indicator will light, or to
enter hibernation shutdown (Hibernation) status, the indicator light goes out.
Do not turn on the power status indicator light under the green light to
remove the battery, otherwise the work will result in the loss of data.
2-2 Connect Transformer
The product of the transformer attached is an international common one, power supply
input voltage range from 100V~240V. But because of differenet countries have different
voltage, different power supply plug. If you use the Ultra-mobile computer in other country.
Please purchse the right dapter or interface in local shop.
Those are right steps of connecting transformer:
Step 1 : Take out transformer and adapter, connect them.
Step 2: Connect the AC power plug on Socket.
Step 3: Connect the transformer plug to ultra mobile computer DC jack.
Step4: Make sure connect well , after install the adpter, press Power on/off swithc of
Ultra-mobile computer to start .
The transformer to be used for ultra mobile computer dedicated ,Do not use in o
ther Purposes, other transformer may be the samiliar with this one ,but not
available for this ultra mobile computer ,please do not use other transformer in
order to avoiding faults on ultra mobile computer.