User's Manual
Table Of Contents
DP585 DMR Two Way Radio User Guide
6.5 Receiving
When the radio receives RF signal on the current channel and reaches squelch start level, the green LED
glows to indicate that carrier is received.
When the current channel is digital channel and when it received private call, group call or all call, the
radio will output the voice from the channel.
When the channel is analogue channel and w hen it received analogue signals with CTCSS matching
the one on this channel (or there is no CTCSS set on the channel), the radio will output voice form the
channel.
6.6 Replying to the Call
When the current channel is digital channel and after a call is received, press PTT button within the call
hang time to reply. If the call hang time is up, you need to initiate a call to reply. The call hang time can
be set by dealer.
When the current channel is analogue channel and after a call is received, press PTT button within the call
hang time and speak to the microphone to reply.
8