User's Manual

DP770 Instruction Manual 21/27
By menu operation:
In standby screen, press [Contacts] key to come to step c), or
a) Press
to enter the menu;
b) Press
, or rotate the knob to select “ contacts”, and press to select.
c) Press
, or rotate the knob to select “Contacts List”, and press to select. Then
press
, or rotate the knob to select the target private call contact, press to select.
Or
Press
, or rotate the knob to select “Manual Dial”, and press to select. Input the
target ID with the keyboard, and press
to select.
d) Press
, or rotate the knob to select “Radio Kill/Revive”, and press to select.
e) The target ID/alias displays on the LCD, indicating that the Radio kill/revive order is sending
out, and the RED LED indicator lights on.
f) Wait for the response.
g) If the response is received, the LCD displays “Radio kill/revive Successful”, or otherwise
displays “Radio kill/revive Failed”.
Note:
During when the “Radio kill/revive” order is sent out and the radio is waiting for the response,
press
, the radio will terminate the order and exit “Radio kill/revive” mode.
Or
If the time to wait for the response is over, the radio will automatically exit this mode and displays
“Radio kill/revive Failed”.
4) Remote Monitor
This function is used to enable the target radio’s MIC, and there is no visible or audible sign
on the monitored radio. You can use this function to remote monitor the sound around the target
radio.
(1) Sending remote monitor
By the programmed “Remote Monitor” key: *
a) Press the navigation keys
, or rotate the knob to select the target contact, and press
to select.
b) The target ID/alias displays on the LCD, indicating that the remote monitor order is sending