User's Manual

DP770 Instruction Manual 22/27
out, and the RED LED indicator lights on.
c) Wait for the response.
d) If the response is received, the LCD displays “Remote Monitor Successful”, or otherwise
displays “Remote Monitor Failed”.
By menu operation:
In standby screen, press [Contacts] key to come to step c), or
a) Press
to enter the menu;
b) Press
, or rotate the knob to select “ contacts”, and press to select.
c) Press
, or rotate the knob to select “Contacts List”, and press to select. Then
press
, or rotate the knob to select the target private call contact, press to select.
Or
Press
, or rotate the knob to select “Manual Dial”, and press to select. Input the
target ID with the keyboard, and press
to select.
d) Press
, or rotate the knob to select “Remote Monitor”, and press to select.
e) The target ID/alias displays on the LCD, indicating that the Remote Monitor order is sending
out, and the RED LED indicator lights on.
f) Wait for the response.
g) If the response is received, the LCD displays “Remote Monitor Successful”, or otherwise
displays “Remote Monitor Failed”.
Note:
During when the “Remote Monitor” order is sent out and the radio is waiting for the response,
press
, the radio will terminate the order and exit “Remote Monitor” mode.
Or
If the time to wait for the response is over, the radio will automatically exit this mode and displays
“Remote Monitor Failed”.
 Emergency Alarm
If enabled and the user is in danger, the user can send out a confirmed emergency alarm
signal and an emergency voice to the administrator user. The user can send the alarm in any time,
even if the current channel is receiving the signal.
Your radio supports the following three means of emergency alarm mode:
Emergency alarm only