User's Manual
Table Of Contents
- 1 Unpacking and Checking
- 2 Battery Information
- 3 Introduction
- 4 Basic Operation
- 5 Initiating/Receiving a Call
- 6 Short Message
- 7 Emergency
- 8 Call Log
- 9 General Setting
- 10 Advanced Features
- 11 Troubleshooting
- 12 Major Technical Specification
- 13 FCC Statement:
4) Select the backlight duration for the screen.
5) Press OK key and the LCD will show “Operation Succeeded”. The time setting for turning off the screen
will be saved.
During the set time, the radio will turn off the screen if no operation is performed. Press any key to restore
the brightness。
9.8 Indicator Setting
You can turn on/off the LED indicator based on different situation.
1) Press
in the home screen to enter the menu.
2) Select and enter“
setting” menu.
3) Select “LED indication” and enter the interface.
4) Select “On” or “Off” and turn on/off the indicator.
5) Press OK key and the LCD will show “Operation Succeeded”. The LED indication setting is saved.
9.9 Talk Around/Repeater Setting
You can switch the work mode based on different situation (talk around or repeater mode).
1) Press
in the home screen to enter the menu.
2) Enter the“
setting” interface.
3) Select “Talk Around/ Repeater” and enter the interface.
4) Select “Talk Around/ Repeater” and switch work mode.
5) Press OK key and the LCD will show “Operation Succeeded”. The work mode will be saved.