User's Manual

- 12 -
Group Call Hang Time: during group call on the terminal, if no PTT button is pressed on any terminals,
the repeater will keep call hang time and does not accept signals of other group. If there is any one of
the members press PTT button during the call hang time, the hang time will be counted again. After the
call hang time is over, the call ends and the channel resources are released. Value range: 0~7000
milliseconds; step value: 500 milliseconds; 4000 milliseconds by default.
Private Call Hang Time: after a private call is initiated on the terminal, and if no PTT button is pressed
on both parties, the repeater will keep call hang time for the terminals. During the call hang time, the
repeater does not accept other calls. After the call hang time is over, the call ends and the channel
resources will be released. Value range: 0~7000 milliseconds; step value is 500 milliseconds; 4000
milliseconds by default.
Emergency Call Hang Time: after an emergency call is initiated, and if no PTT button is pressed on
both parties, the repeater will keep call hang time for the terminals. During the call hang time, the
repeater does not accept other calls. After the call hang time is over, the call ends and the channel
resources will be released. Value range: 0~7000 milliseconds; step value is 500 millisecond; 4000
milliseconds by default.
Call Hang Time: after the terminal call ends, the repeater keep call hang time for the terminal. During
this time, press PTT button without having to establish connection to continue the call. Value range:
0~7000 milliseconds; step value: 500 milliseconds; 4000 milliseconds by default.