User's Manual
Table Of Contents
- 1. Package-opened Inspection
- 2. Preparation
- 3. Radio Overview
- 4. Basic Operation
- 5. Programmable Key Function
- 6. Auxiliary functions
- 6.1 TOT Timer
- 6.2 battery saving
- 6.3 Low battery alarm
- 6.4 Number announcement
- 6.5 Quite Talk (QT) / Digital Quiet Talk (DQT)
- 6.6 Dual Tone Multi-Frequency (DTMF) Coding
- 6.7 Talkaround
- 6.8 Scan
- 6.8.1 Start/End Scan Function
- 6.8.2 Nuisance Delete
- 6.9 Transmission Begin and Transmission End Signals (PTT ID)
- 6.10 Lone worker
- 6.11 Emergency Alarm
- 7. Wired Clone Mode
- 8. Trouble Shooting Guide
- 9. Major Specifications
Page 11 of 22
Remove the battery
To remove the battery, slightly press the battery and pull the push button upwards, and then
remove the battery from the phone.
Note:
Please avoid short circuit of terminals of the battery or throw the battery in fire.
Do not remove the shell of the battery by yourself.
2.3 Install the Antenna
Holding the base of the antenna, screw the antenna clockwise into the connector on top of the
phone till it’s fastened.