User's Manual
Table Of Contents
- 1. Package-opened Inspection
- 2. Preparation
- 3. Radio Overview
- 4. Basic Operation
- 5. Programmable Key Function
- 6. Auxiliary functions
- 6.1 TOT Timer
- 6.2 battery saving
- 6.3 Low battery alarm
- 6.4 Number announcement
- 6.5 Quite Talk (QT) / Digital Quiet Talk (DQT)
- 6.6 Dual Tone Multi-Frequency (DTMF) Coding
- 6.7 Talkaround
- 6.8 Scan
- 6.8.1 Start/End Scan Function
- 6.8.2 Nuisance Delete
- 6.9 Transmission Begin and Transmission End Signals (PTT ID)
- 6.10 Lone worker
- 6.11 Emergency Alarm
- 7. Wired Clone Mode
- 8. Trouble Shooting Guide
- 9. Major Specifications
Page 12 of 22
2.4 Install external speaker/MIC
Open the soft rubber cover of external speaker or MIC with your fingernail, insert the pin of
matching external speaker or MIC into the pinhole of the phone.
2.5 Install the belt clip
Align the guide rail of the support of the belt clip to the guide slot on the back of the battery and
push downwards properly; to remove the belt clip, insert your fingernail or a tool into the slot on
the upper part of the belt clip and push the card upward, at the same time, push the belt clop
upward by force to remove it.
3. Radio Overview