User's Manual
Table Of Contents
- 1. Package-opened Inspection
- 2. Preparation
- 3. Radio Overview
- 4. Basic Operation
- 5. Programmable Key Function
- 6. Auxiliary functions
- 6.1 TOT Timer
- 6.2 battery saving
- 6.3 Low battery alarm
- 6.4 Number announcement
- 6.5 Quite Talk (QT) / Digital Quiet Talk (DQT)
- 6.6 Dual Tone Multi-Frequency (DTMF) Coding
- 6.7 Talkaround
- 6.8 Scan
- 6.8.1 Start/End Scan Function
- 6.8.2 Nuisance Delete
- 6.9 Transmission Begin and Transmission End Signals (PTT ID)
- 6.10 Lone worker
- 6.11 Emergency Alarm
- 7. Wired Clone Mode
- 8. Trouble Shooting Guide
- 9. Major Specifications
Page 13 of 22
1. LED INDICATOR
Red LED on when transmitting, green LED on when receiving signals.
Red LED flashes when low battery.
2. Channel selector knob
Turning to select channels 1-16.
3. Power/Volume knob
Turn clockwise to turn on the phone, keep turning to adjust the volume. To turn off the phone, just turn
the know anticlockwise till a sound of “Ka-Da” is produced.
4. PTT (PUSH-TO-TALK) key
Press the PTT key and talk towards the MIC to send the voice to the recipient.
5. Side key 1 (programmable key)
6. Side key 2 (programmable key)
7. Top key (programmable key)
8. Speaker/MIC connector
Connecting external speaker and MIC.
4. Basic Operation
1. Startup:
Turn the Power/Volume know clockwise to turn on the phone. If the dealer has set the prompt sound,
a sound of “Bee” will be produced.